Ford Transit Connect (2016 year). Manual — part 21
![](/vehicles/mikiemo/vighinkeve/ver/xti.png)
Settings
Warning
Display
Compass
Convenience
Calibrate
Set Zone
Create MyKey
Create MyKey
MyKey
Always On
Traction Ctrl
User selectable
Always On
911 Assist
User selectable
Choose your applicable setting
Max Speed
Choose your applicable setting
Speed Warning
Volume Limiter
Always On
Do Not Disturb
User selectable
Clear MyKey
Clear MyKeys
CLOCK
Type 1
To adjust the clock, switch the ignition on
and press buttons H or M on the
information and entertainment display as
necessary.
Type 2
Note: Use the information display to adjust
the clock. See (page 85).
TRIP COMPUTER
Resetting the Trip Computer
Press and hold OK on the current screen
to reset the respective trip, distance, time
and average fuel information.
Trip Odometer
Registers the distance traveled of
individual journeys.
Distance to Empty
Indicates the approximate distance your
vehicle will travel on the fuel remaining in
the tank. Changes in driving pattern may
cause the value to vary.
![](/vehicles/mikiemo/vighinkeve/ver/teike.png)
Average Fuel
Indicates the average fuel consumption
since the function was last reset.
Digital Speedometer
The speed your vehicle is traveling at will
display as a digital number.
PERSONALIZED SETTINGS
Measure Units
To swap between imperial and metric
units, scroll to this display and press the
OK button.
Swapping between imperial and metric
units will affect the following displays:
•
Distance to empty.
•
Average fuel consumption.
•
Instantaneous fuel consumption.
•
Average speed.
Switching Chimes Off
The following chimes can be switched off:
•
Warning messages.
•
Information messages.
INFORMATION MESSAGES
E130248
Press the OK button to acknowledge and
remove some messages from the
information display. Other messages will
be removed automatically after a short
time.
Certain messages need to be confirmed
before you can access the menus.
The message indicator
illuminates to supplement some
messages. It will be red or amber
depending on the severity of the message
and will remain on until the cause of the
message has been rectified.
Some messages will be supplemented by
a system specific symbol with a message
indicator.
Note: Depending on the options on your
vehicle, not all of the messages will display
or be available. Certain messages may be
abbreviated or shortened depending upon
which instrument cluster type you have.
![](/vehicles/mikiemo/vighinkeve/ver/joutolldayon.png)
Airbag
Action
Message Indic-
ator
Message
Have your vehicle checked by an authorized
dealer as soon as possible.
Amber
Airbag fault
Service now
Alarm
Action
Message Indic-
ator
Message
Displays when the alarm has been triggered
due to unauthorized entry. See Passive
Amber
Alarm activated
Check Vehicle
Have your vehicle checked by an authorized
dealer as soon as possible.
-
Alarm fault
Service required
Battery and Charging System
Action
Message Indic-
ator
Message
Stop your vehicle as soon as it is safe to do
so and switch the ignition off. Have your
vehicle checked by an authorized dealer as
soon as possible.
Red
Electrical system over-
voltage
Stop safely
Displays to warn of a low battery condition.
Turn off all unnecessary electrical
accessories. Have your vehicle checked by
an authorized dealer as soon as possible.
Amber
Battery low
See manual
![](/vehicles/mikiemo/vighinkeve/ver/assarelenonn.png)
Blind Spot Information and Cross Traffic Alert System
Action
Message
Indicator
Message
Displayed when the blind spot information
system and cross traffic alert system sensors
are blocked. See Blind Spot Information
Amber
BLIS Low visibility See
manual
Displayed when a fault with the system has
occurred. Contact your authorized dealer as
soon as possible.
Amber
BLIS: X sensor fault
Service required
Displayed when the system is not available due
to trailer use. See Blind Spot Information
Amber
BLIS not available Trailer
attached
Displayed when the system detects a vehicle.
See Blind Spot Information System (page
Amber
Cross Traffic Vehicle
coming from X
Displayed when the blind spot information
system and cross traffic alert system sensors
are blocked. See Blind Spot Information
Amber
Cross Traffic Sensor
blocked See manual
Displays when the system requires service due
to a malfunction. Contact your authorized
dealer.
Amber
Cross Traffic fault
Service required
Displayed when the system is not available due
to trailer use. See Blind Spot Information
-
Cross Traffic disabled
Trailer attached
Doors Open
Action
Message Indic-
ator
Message
Vehicle is moving. Stop your vehicle as soon
as safely possible and close.
Red
Driver door ajar
Vehicle is moving. Stop your vehicle as soon
as safely possible and close.
Red
Driver side rear door ajar
Vehicle is moving. Stop your vehicle as soon
as safely possible and close.
Red
Passenger door ajar
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст