Ford F-150 Heritage (2004 year). Manual — part 6
2. Scan: Press SCAN to move up
the radio frequency band. SCAN
automatically finds a station, plays it
for five seconds, then moves to the next station. Press again to stop.
Tape/CD: Press SCAN to sample tape/CD selections for eight seconds.
Press again to stop.
3. CD Door: Insert the disc with
the playing side down and printed
side up.
4. Cassette door: Insert the
cassette with the opening to the
right.
5. Eject: Press to eject the
cassette/CD. The radio will resume
playing.
6. Tape: Press to stop tape during
rewind/fast forward. Press to begin
tape play when changing from radio
or CD play.
CD: Press to start CD play. With the
dual media audio, press CD to
toggle between single CD and CD
changer play.
7. Mute: Press to MUTE playing
media; press again return to playing
media.
8. Auto: Press to set first six strong
stations into AM, FM1 or FM2
memory buttons; press again to
return to normal stations.
SCAN
Entertainment Systems
26
9. CLOCK: Press and release the
CLK control until SELECT HOUR is
displayed then press SEL
to
decrease the hours or
to
increase the hours.
To set the minute, press and release the CLK control until SELECT MIN
is displayed then press SEL
to decrease the minutes or
to
increase the minutes.
10. Balance: Press BAL; then press
SEL
/
to shift sound to the
left/right speakers.
Fade: Press FADE; then press
SEL
/
to shift sound to the
rear/front speakers.
11. Memory preset buttons: To
set a station: Select frequency band
AM/FM; tune to a station, press and
hold a preset button until sound returns.
12. Shuffle (CD): Press to play
tracks in random order.
13. Compression (CD): Press to
bring soft and loud passages
together for a more consistent
listening level.
14.
Dolby
威 noise reduction:
Reduces tape noise and hiss; press
to activate/deactivate.
15. Side 1–2: Press to play reverse
side of the tape.
Entertainment Systems
27
16. Fast Forward (FF): Press to
fast forward the tape.
17. Rewind (REW): Press to
rewind the tape.
18. Select (SEL): Use with Bass,
Treble, Balance, Fade and Clock
controls.
19. Bass: Press BASS; then press
SEL
/
to decrease/increase
the bass output.
Treble: Press TREB; then press
SEL
/
to decrease/increase
the treble output.
20. Tune: Works in radio mode only.
Press TUNE
/
to change
frequency down/up.
21. Seek: Press and release
SEEK
/
for previous/next
strong station, selection or track.
22. AM/FM: Press to select AM/FM
frequency band.
FF
2
REW
1
SEL
SEEK
TUNE
SEEK
TUNE
Entertainment Systems
28
RADIO FREQUENCIES
AM and FM frequencies are established by the Federal Communications
Commission (FCC) and the Canadian Radio and Telecommunications
Commission (CRTC). Those frequencies are:
AM - 530, 540–1600, 1610 kHz
FM- 87.7, 87.9–107.7, 107.9 MHz
RADIO RECEPTION FACTORS
There are three factors that can effect radio reception:
• Distance/strength: The further you travel from an FM station, the
weaker the signal and the weaker the reception.
• Terrain: Hills, mountains, tall buildings, power lines, electric fences,
traffic lights and thunderstorms can interfere with your reception.
• Station overload: When you pass a broadcast tower, a stronger signal
may overtake a weaker one and play while the weak station frequency
is displayed.
CASSETTE/PLAYER CARE
Do:
• Use only cassettes that are 90 minutes long or less.
• Tighten very loose tapes by inserting a finger or pencil into the hole
and turning the hub.
• Remove loose labels before inserting tapes.
• Allow tapes which have been subjected to extreme heat, humidity or
cold to reach a moderate temperature before playing.
• Clean the cassette player head with a cassette cleaning cartridge after
10–12 hours of play to maintain good sound/operation.
Don’t:
• Expose tapes to direct sunlight, extreme humidity, heat or cold.
• Leave tapes in the cassette player for a long time when not being
played.
Entertainment Systems
29
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст