Volvo S90 Recharge Plug-in Hybrid (2021 year). Manual in english — page 12
CLIMATE
215
Temperature and fan speed can be
changed without deactivating the automat-
ically-regulated climate control system.
The automatically-regulated climate con-
trol system is deactivated when the air dis-
tribution is changed manually or when
maximum defroster is activated.
Related information
•
Activating and deactivating air
recirculation
Air recirculation shuts out bad air, exhaust
gases, etc. from outside the car by the cli-
mate control system reusing the air in the
passenger compartment.
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
2. Press
Recirc
.
> Air recirculation is activated/deacti-
vated and the button illuminates/extin-
guishes.
If the air in the car is recirculated for too
long then there is a risk of misting on the
insides of the windows.
It is not possible to activate air recircula-
tion when max defroster is activated.
Related information
•
•
Activating and deactivating time setting
for air recirculation (p. 216)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
* Option/accessory.
216
Activating and deactivating time
setting for air recirculation
Air recirculation shuts out bad air, exhaust
gases, etc. from outside the car by the cli-
mate control system reusing the air in the
passenger compartment.
It is possible set whether the air recirculation
timer should be activated/deactivated. When
the timer is activated, air recirculation is auto-
matically switched off after 20 minutes.
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
Climate
.
3. Select
Recirculation Timer
to activate/
deactivate the air recirculation timer.
Related information
•
Activating and deactivating air recircula-
tion (p. 215)
Activating and deactivating max
defroster
Max defroster is used to quickly remove mist
and ice from windows.
Max defroster deactivates auto-regulation of
the climate and air recirculation, activates air
conditioning and changes the fan level to
5
and the temperature to
HI
.
Changing the fan level to
5
increases the
noise level.
When max defroster is deactivated, the cli-
mate control system returns to the previous
settings.
Activating and deactivating max
defroster from centre console
There is a physical button in the centre con-
sole for quick access to max defroster.
With heated windscreen
*
the max defroster
can only be activated individually from the cli-
mate view in the centre display.
Physical button in the centre console.
Cars without heated windscreen:
–
Press the button.
> Max defroster is activated/deactivated
and the button illuminates/extin-
guishes.
Cars with heated windscreen:
–
Press the button repeatedly in order to
switch between the three levels:
•
Activated heated windscreen
•
Activated heated windscreen and max
defroster
•
Deactivated.
> Heated windscreen and max defroster
are activated/deactivated and the but-
ton illuminates/extinguishes.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
}}
* Option/accessory.
217
Max defroster starts with a certain delay in
order to avoid a short increase in fan level if
the heated windscreen is deactivated by
two quick presses of the button.
Activating and deactivating max
defroster from centre display
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
2. Press
Max
.
> Max defroster is activated/deactivated
and the button illuminates/extin-
guishes.
Related information
•
Activating and deactivating the
heated windscreen
*
A heated windscreen is used to quickly
remove mist and ice from the window.
Activating and deactivating heated
windscreen from centre console
In the centre console is a physical button for
rapid access to the heated windscreen.
Physical button in the centre console.
–
Press the button repeatedly in order to
switch between the three levels:
•
Activated heated windscreen
•
Activated heated windscreen and max
defroster
•
Deactivated.
> Heated windscreen and max defroster
are activated/deactivated and the but-
ton illuminates/extinguishes.
Activating and deactivating heated
windscreen from centre display
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
2. Press
Electric
.
> Heated windscreen is activated/deacti-
vated and the button illuminates/extin-
guishes.
A triangular area at the end of each side of
the windscreen is not electrically heated,
where de-icing may take longer.
The heated windscreen may affect the per-
formance of transponders and other com-
munication equipment.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
CLIMATE
* Option/accessory.
218
Related information
•
•
Activating and deactivating automatic
start of heated windscreen
Activating and deactivating
automatic start of heated
windscreen
*
A heated windscreen is used to quickly
remove mist and ice from the window.
It is possible to set whether automatic start of
heated windscreen should be activated/deac-
tivated when the engine is started. With auto-
matic start activated, heating will start when
there is a risk of ice or misting on the wind-
screen/window. The heating switches off
automatically when the windscreen/window is
sufficiently warm and the ice or misting is
gone.
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
Climate
.
3. Select
Auto Front Defroster
to activate/
deactivate automatic start of heated wind-
screen.
Related information
•
Activating and deactivating the heated
windscreen
Activating and deactivating the
heated rear window and door
mirrors
The heated rear window and door mirrors are
used to quickly remove mist and ice from the
windows and mirrors.
Activating and deactivating heated
rear window and door mirrors from
centre console
In the centre console is a physical button for
rapid access to the heated rear window and
door mirrors.
Physical button in the centre console.
–
Press the button.
> Heated rear window and door mirrors
are activated/deactivated and the but-
ton illuminates/extinguishes.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
}}
219
Activating and deactivating heated
rear window and door mirrors from
centre display
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
2. Press
Rear
.
> Heated rear window and door mirrors
are activated/deactivated and the but-
ton illuminates/extinguishes.
Related information
•
•
Activating and deactivating automatic
starting of the heated rear window and
door mirrors (p. 219)
Activating and deactivating
automatic starting of the heated
rear window and door mirrors
The heated rear window and door mirrors are
used to quickly remove mist and ice from the
windows and mirrors.
It is possible to set whether automatic start of
heated rear window and door mirrors should
be activated/deactivated when the engine is
started. With automatic start activated, heat-
ing will start when there is a risk of ice or mist-
ing on the windscreen/window. The heating
switches off automatically when the wind-
screen/window is sufficiently warm and the
ice or misting is gone.
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
Climate
.
3. Select
Auto Rear Defroster
to activate/
deactivate automatic start of heated rear
window and door mirrors.
Related information
•
Activating and deactivating the heated
rear window and door mirrors (p. 218)
Regulating fan level for front seat
2
The fan can be set to several different auto-
matically controlled fan speeds for the front
seat.
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
Fan control buttons in the climate view.
2. Tap on the desired fan level,
Off
,
1
-
5
or
Max
.
> Fan level is changed and the buttons
for the selected level illuminate.
2
For 2-zone climate, also rear seat.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
CLIMATE
220
If the fan is fully switched off then the air
conditioning is not engaged, which results
in a risk of misting on the insides of the
windows.
The climate control system automatically
adjusts the air flow within the selected fan
level based on requirements. This means
that the fan speed may change even
though the fan level is the same.
Related information
•
Regulating temperature for front
seat
3
The temperature can be set to the desired
number of degrees for the front seat's climate
zones.
Temperature buttons in the climate row.
1. Press the left or right-hand side tempera-
ture button in the centre display's climate
row to open the controls.
Temperature control.
2. Regulate the temperature by either of the
following:
•
drag the control to the desired tem-
perature, or
•
press
+
/
−
to raise/lower the tempera-
ture gradually.
> The temperature changes and the but-
ton shows the set temperature.
Heating or cooling cannot be hastened by
selecting a higher or lower temperature
than the actual desired temperature.
Related information
•
3
For 2-zone climate, also rear seat.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
}}
* Option/accessory.
221
Synchronising temperature
The temperature in the car's different climate
zones can be synchronised with the tempera-
ture set on the driver's side.
Synchronisation button on the driver's side tempera-
ture controls.
1. Press the driver's side temperature button
in the centre display's climate row in order
to open the controls.
2. Press
Synchronise temperature
.
> The temperature for all zones in the car
is synchronised with the temperature
set for the driver's side and the syn-
chronisation symbol is shown adjacent
to the temperature button.
The synchronisation is stopped by means of a
further press on
Synchronise temperature
or
by means of changing the temperature set-
tings for a climate zone other than the driver's.
Related information
•
Activating and deactivating air
conditioning
The air conditioning cools and dehumidifies
incoming air as required.
When the air conditioning is activated, the cli-
mate control system automatically controls
starting and switching off as required.
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
2. Press
AC
.
> Air conditioning is activated/deacti-
vated and the button illuminates/extin-
guishes.
Close all side windows and the sunroof
*
so
that the air conditioning should work as
well as possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
CLIMATE
* Option/accessory.
222
It is not possible to activate the air condi-
tioning when the fan control is in
Off
posi-
tion.
Related information
•
Parking climate
Parking climate control is a generic term for
various functions that improve the passenger
compartment climate when the car is parked,
e.g. preconditioning.
Functions belonging to the parking
climate control are controlled from
the
Parking climate
in climate view
in the centre display. Open climate
view by pressing the symbol in the middle of
the climate row.
Related information
•
•
•
•
Climate comfort when parking (p. 229)
•
Symbols and messages for parking cli-
mate control (p. 231)
Preconditioning
Preconditioning is a climate function which, if
possible, attempts to reach comfort tempera-
ture in the passenger compartment before
departure.
Preconditioning can use direct start or be set
via the timer.
The function utilises several systems in differ-
ent cases:
•
In a cold climate, the parking heater
warms up the passenger compartment to
a comfortable temperature.
•
The air conditioning, in a hot climate, cools
the passenger compartment to the com-
fort temperature.
•
Activation of heated steering wheel
*
and
heated seats
*
for driver and passenger can
be selected.
•
Heated windscreen, rear window and door
mirrors are automatically activated as
required.
During preconditioning in a hot climate, con-
densation from the air conditioning may drip
under the car. This is normal.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
}}
* Option/accessory.
223
Preconditioning is only available when the
car is connected to an electrical socket.
4
A
charging station that is not constantly
active, due to a timer, may result in pre-
conditioning failure.
If the car is not connected to an electrical
socket, it is still possible to cool the pas-
senger compartment briefly in a warm cli-
mate by starting preconditioning directly.
During preconditioning of the passenger
compartment, the car works to reach com-
fort temperature and not the temperature
set in the climate control system.
Precleaning
*
starts automatically when
preconditioning is completed.
Related information
•
•
Start and switch off preconditioning
(p. 223)
•
Preconditioning time setting (p. 224)
•
Start and switch off
preconditioning
Preconditioning heats or cools the passenger
compartment, if possible, prior to driving. The
function can use direct start from the centre
display or a mobile phone.
Start and switch off from car
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
2. Select the
Parking climate
tab.
3. Select whether seat heating and steering
wheel heating should be activated during
preconditioning by ticking/unticking the
boxes for the respective function.
4. Press
Start Pre-con. & Cleaning
.
> Preconditioning is started/switched off
and the button is illuminates/extin-
guishes.
Preconditioning is only available when the
car is connected to an electrical socket.
5
A
charging station that is not constantly
active, due to a timer, may result in pre-
conditioning failure.
If the car is not connected to an electrical
socket, it is still possible to cool the pas-
senger compartment briefly in a warm cli-
mate by starting preconditioning directly.
The car's doors and windows should be
closed during the preconditioning of the
passenger compartment.
Precleaning
*
starts automatically when
preconditioning is completed.
4
Not applicable to fuel-driven auxiliary heater.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
CLIMATE
* Option/accessory.
224
WARNING
Do not use preconditioning
6
:
•
In unventilated spaces indoors.
Exhaust gases are emitted if the heater
starts.
•
In locations with combustible or flam-
mable material nearby. Fuel, gas, long
grass, sawdust, etc. may ignite.
•
When there is a risk that the heater’s
exhaust line may be blocked. For
example, deep snow inside the front
right-hand wheel housing can obstruct
the heater’s ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a
long time in advance.
Starting from the app
Starting the pre-conditioning, as well as infor-
mation on selected settings, can be managed
from a device that has the Volvo On Call
*
app.
Preconditioning heats or cools the compart-
ment (with the car's air conditioning) until a
comfortable temperature is reached.
The passenger compartment can also be pre-
conditioned with the car remote start function
(Engine Remote Start - ERS)
7
via the Volvo
On Call
*
app.
Related information
•
•
•
Preconditioning time setting (p. 224)
•
Preconditioning time setting
The timer can be set so that the precondition-
ing is finished at a predetermined time.
The timer can handle up to 8 different settings
for
•
a time on a single date
•
a time on one or more days of the week,
with or without repetition.
Preconditioning is only available when the
car is connected to an electrical socket.
8
A
charging station that is not constantly
active, due to a timer, may result in pre-
conditioning failure.
If the car is not connected to an electrical
socket, it is still possible to cool the pas-
senger compartment briefly in a warm cli-
mate by starting preconditioning directly.
Related information
•
•
Adding and editing time setting for pre-
conditioning (p. 225)
5
Not applicable to fuel-driven auxiliary heater.
6
Applicable to fuel-driven auxiliary heater.
7
Certain markets.
8
Not applicable to fuel-driven auxiliary heater.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
}}
225
•
Activating and deactivating time setting
for preconditioning (p. 226)
•
Removing time setting for preconditioning
(p. 227)
Adding and editing time setting for
preconditioning
The timer for preconditioning can manage up
to 8 time settings.
Adding a time setting
The button to add a time setting in the
Parking
climate
tab in the climate view.
1. Open the climate view in the centre dis-
play.
2. Select the
Parking climate
tab.
3. Press
Add timer
.
> A pop-up window is shown.
It is not possible to add a time setting if
there already are 8 settings entered for the
timer. Delete a time setting in order to be
able to add a new one.
4. Tap on
Date
to set the time for a single
date.
Tap on
Days
to set the time for one or
more days of the week.
With
Days
: Activate/deactivate repetition
by ticking/unticking the box for
Repeat
weekly
.
5. With
Date
: Select the date for precondi-
tioning by scrolling the date list with the
arrows.
With
Days
: Select the days of the week
for preconditioning by tapping on the but-
tons for the days of the week.
6. Set the time when the preconditioning
should be finished by scrolling with the
arrows.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
CLIMATE
226
7. Tap on
Confirm
in order to add the time
setting.
> The time setting is added to the list and
is activated.
WARNING
Do not use preconditioning
9
:
•
In unventilated spaces indoors.
Exhaust gases are emitted if the heater
starts.
•
In locations with combustible or flam-
mable material nearby. Fuel, gas, long
grass, sawdust, etc. may ignite.
•
When there is a risk that the heater’s
exhaust line may be blocked. For
example, deep snow inside the front
right-hand wheel housing can obstruct
the heater’s ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a
long time in advance.
Editing a time setting
1. Open the climate view in the centre dis-
play.
2. Select the
Parking climate
tab.
3. Press the time setting that is to be
changed.
> A pop-up window is shown.
4. Edit the time setting in the same way as
described in "Adding a time setting"
above.
Related information
•
•
Preconditioning time setting (p. 224)
•
Activating and deactivating time setting
for preconditioning (p. 226)
•
Removing time setting for preconditioning
(p. 227)
Activating and deactivating time
setting for preconditioning
A time setting in the timer for preconditioning
can be activated or deactivated based on
need.
The timer buttons in the
Parking climate
tab in the
climate view.
1. Open the climate view in the centre dis-
play.
2. Select the
Parking climate
tab.
3. Activate/deactivate a time setting by tap-
ping on the timer button to the right of the
setting.
> The time setting is activated/deacti-
vated and the button illuminates/extin-
guishes.
9
Applicable to fuel-driven auxiliary heater.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
227
WARNING
Do not use preconditioning
10
:
•
In unventilated spaces indoors.
Exhaust gases are emitted if the heater
starts.
•
In locations with combustible or flam-
mable material nearby. Fuel, gas, long
grass, sawdust, etc. may ignite.
•
When there is a risk that the heater’s
exhaust line may be blocked. For
example, deep snow inside the front
right-hand wheel housing can obstruct
the heater’s ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a
long time in advance.
Related information
•
•
Preconditioning time setting (p. 224)
•
Adding and editing time setting for pre-
conditioning (p. 225)
•
Removing time setting for preconditioning
(p. 227)
Removing time setting for
preconditioning
A time setting for preconditioning that is no
longer required can be deleted.
The button for editing the list/deleting the time set-
ting in the tab
Parking climate
in the climate view.
1. Open the climate view in the centre dis-
play.
2. Select the
Parking climate
tab.
3. Press
Edit list
.
4. Press the delete icon to the right in the
list.
> The icon changes to the text
Delete
.
5. Press
Delete
to confirm.
> The time setting is removed from the
list.
Related information
•
•
Preconditioning time setting (p. 224)
•
Adding and editing time setting for pre-
conditioning (p. 225)
•
Activating and deactivating time setting
for preconditioning (p. 226)
10
Applicable to fuel-driven auxiliary heater.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
* Option/accessory.
228
Precleaning
*
Precleaning the car prior to departure is used
to improve air quality in the passenger com-
partment.
Precleaning can only be started directly from
the centre display, but it also starts automati-
cally when preconditioning ends.
This function uses the ventilation to blow fresh
air into the passenger compartment and then
circulates the air through the air conditioning
system's passenger compartment filter.
Related information
•
•
Starting and switching off precleaning
•
Starting and switching off
precleaning
*
Precleaning improves the air quality in the
passenger compartment prior to driving. The
function can use direct start from the centre
display or a mobile phone.
Start and switch off from car
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
2. Select the
Parking climate
tab.
3. Press
Start Pre-cleaning
.
> Precleaning is started/switched off and
the button is illuminates/extinguishes.
Starting from the app
*
Start of precleaning and information about the
selected settings can be managed from a
device that has the Volvo On Call
*
app.
Precleaning always starts automatically
when preconditioning is completed.
Related information
•
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CLIMATE
}}
229
Climate comfort when parking
The climate in the car's passenger compart-
ment can be maintained while the car is
parked, e.g. if the engine needs to be
switched off but the driver or passenger(s)
wants to remain in the car and maintain the
level of climate comfort.
Starting climate comfort retention is only pos-
sible via direct start from the centre display.
The function utilises several systems in differ-
ent cases:
•
Residual heat from the engine, in a cold
climate, heats the passenger compart-
ment to comfort temperature.
•
When it is warm, the ventilation cools the
passenger compartment by blowing in air
from outside the car.
Climate comfort retention is switched off
when the car is locked from the outside to
avoid using residual heat unnecessarily.
Use of the function is intended to maintain
climate comfort when driver or passengers
remain inside the car.
There is a limit to how long climate com-
fort can be maintained in a cold climate,
which depends on the amount of residual
heat available.
Related information
•
•
Starting and switching off climate comfort
when parking (p. 229)
Starting and switching off climate
comfort when parking
Climate comfort retention maintains the cli-
mate in the passenger compartment after
driving. The function can use direct start from
the centre display.
1. Open climate view in the centre display by
pressing the symbol in the middle of the
climate row.
2. Select the
Parking climate
tab.
3. Press
Keep climate comfort
.
> Climate comfort retention is started/
switched off and the button illumi-
nates/extinguishes.
It is not possible to start climate comfort
retention if there is not enough residual
heat in the engine to maintain the passen-
ger compartment climate, or if the outside
temperature is above approx. 20°C (68°F).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
CLIMATE
230
Climate comfort retention is switched off
when the car is locked from the outside to
avoid using residual heat unnecessarily.
Use of the function is intended to maintain
climate comfort when driver or passengers
remain inside the car.
There is a limit to how long climate com-
fort can be maintained in a cold climate,
which depends on the amount of residual
heat available.
Related information
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст