Toyota Hilux (2017 year). Manual — part 137
555
8
When trouble arises
8-1. Essential information
Emergency flashers. . ...556
If your vehicle has to
be stopped in an
emergency. . . . . ...557
8-2. Steps to take in an
emergency
If your vehicle needs
to be towed . . . . . ..559
If you think something is
wrong. . . . . . . ...564
Fuel pump shut off
system (gasoline engine
only). . . . . . . . .565
Fire extinguisher . . . . 566
If a warning light turns on
or a warning buzzer
sounds . . . . . . . .567
If a warning message is
displayed . . . . . . .577
If you have a flat tire . . ..584
If the engine will not
start. . . . . . . . ..601
If the electronic key does
not operate properly
(vehicles with smart
entry & start system). . 603
If the vehicle battery is
discharged . . . . . ...607
If your vehicle
overheats. . . . . . .613
If you run out of fuel
and the engine stalls
(diesel engine only) . . .616
If the vehicle becomes
stuck . . . . . . . . 617
![](/vehicles/linovind/yoll/ngr/celf.png)
556
8-1. Essential information
Emergency flashers
Press the switch.
All the turn signal lights will flash.
To turn them off, press the switch
once again.
■
Emergency flashers
If the emergency flashers are used for a long time while the engine is not
operating, the battery may discharge.
The emergency flashers are used to warn other drivers when the
vehicle has to be stopped in the road due to a breakdown, etc.
![](/vehicles/linovind/yoll/ngr/tren.png)
557
8-1. Essential information
8
W
hen
trou
bl
e ari
se
s
If your vehicle has to be stopped in an
emergency
Steadily step on the brake pedal with both feet and firmly depress it.
Do not pump the brake pedal repeatedly as this will increase the effort
required to slow the vehicle.
Shift the shift lever to N.
X
If the shift lever is shifted to N
After slowing down, stop the vehicle in a safe place by the road.
Stop the engine.
X
If the shift lever cannot be shifted to N
Keep depressing the brake pedal with both feet to reduce vehicle
speed as much as possible.
Vehicles without smart entry &
start system:
Stop the engine by turning the
engine switch to the “ACC”
position.
Vehicles with smart entry &
start system:
To stop the engine, press and
hold the engine switch for 2
consecutive seconds or more,
or press it briefly 3 times or
more in succession.
Stop the vehicle in a safe place by the road.
Only in an emergency, such as if it becomes impossible to stop
the vehicle in the normal way, stop the vehicle using the follow-
ing procedure:
1
2
3
4
3
4
Press and hold for 2 seconds or
more, or press briefly 3 times or
more
5
558
8-1. Essential information
WARNING
■
If the engine has to be turned off while driving
●
Power assist for the brakes and steering wheel will be lost, making the
brake pedal harder to depress and the steering wheel heavier to turn.
Decelerate as much as possible before turning off the engine.
●
Vehicles without smart entry & start system: Never attempt to remove the
key, as doing so will lock the steering wheel.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст