Toyota Sequoia (2005). Manual — part 533
–
DIAGNOSTICS
MULTIPLEX COMMUNICATION SYSTEM
DI–1927
2121
DTC
B1224
Door lock switch circuit on passenger
door
CIRCUIT DESCRIPTION
This DTC is output while the body ECU senses the door lock state through the door unlock detection switch,
which is built into the door lock motor.
If the DTC is output, the following may be malfunctioning:
DTC No.
DTC Detecting Condition
Trouble Area
B1224
Does not operate door key lock and unlock switch
Door lock control switch front RH
(Built in passenger door ECU)
Door unlock detection switch front RH
Wire harness
Body ECU
HINT:
For details of inspection, see page
If the problem reoccurs even after replacement, replace the body ECU.
DIDFF–01
DI–1928
–
DIAGNOSTICS
MULTIPLEX COMMUNICATION SYSTEM
2122
DTC
B1231
Jam protection limit switch circuit on
driver door
CIRCUIT DESCRIPTION
This DTC is output while the body ECU senses the limit position through the limit switch, which is built into
the power window motor.
If the DTC is not output, the following may be malfunctioning:
DTC No.
DTC Detection Condition
Trouble Area
B1231
No change in limit switch position for more than 2.0 seconds
even if moving the glass down when limit switch is OFF
(window glass is fully closed)
Limit switch (Built in power window motor)
Driver door ECU
Wire harness
Body ECU
HINT:
For details of inspection, see page
If the problem reoccurs even after replacement, replace the body ECU.
DI1T1–06
–
DIAGNOSTICS
MULTIPLEX COMMUNICATION SYSTEM
DI–1929
2123
DTC
B1232
Jam protection pulse switch circuit on
driver door
CIRCUIT DESCRIPTION
This DTC is output while the body ECU senses switch position information through the pulse switch, which
is built into the power window motor.
If the DTC is not output when the power window operates, the following may be malfunctioning:
DTC No.
DTC Detecting Condition
Trouble Area
B1232
No change in pulse switch position information for more than
2.0 seconds even if moving the glass down when limit switch is
OFF (window glass is fully closed).
Pulse switch (Built in power window motor)
Driver door ECU
Wire harness
Body ECU
HINT:
For details of inspection, see page
If the problem reoccurs even after replacement, replace the body ECU.
DI1T2–07
DI–1930
–
DIAGNOSTICS
MULTIPLEX COMMUNICATION SYSTEM
2124
DTC
B1233
Jam protection limit switch circuit on
passenger door
CIRCUIT DESCRIPTION
This DTC is output while the body ECU senses the limit position through the limit switch, which is built into
the power window motor.
If the DTC is not output, the following may be malfunctioning:
DTC No.
DTC Detection Condition
Trouble Area
B1233
No change in limit switch position for more than 2.0 seconds
even if moving the glass down when limit switch is OFF
(window glass is fully closed)
Limit switch (Built in power window motor)
Passenger door ECU
Wire harness
Body ECU
HINT:
For details of inspection, see page
If the problem reoccurs even after replacement, replace the body ECU.
DIDFG–01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст