Toyota Tundra. Manual — part 1731
![](/vehicles/linovind/mig/whoceedonodb/kal.png)
Fig. 75: Identifying Air Injection Control Driver Connectors
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the bolt
c
Disconnect the 2 wire harness clamps
Fig. 76: Identifying Wire Harness Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d
Remove the 3 bolts and air injection control driver assembly
Fig. 77: Identifying Bolts On Air Injection Control Driver Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
DISASSEMBLY
1
REMOVE AIR INJECTION CONTROL DRIVER (for Bank 1)
2009 Toyota Tundra
2009 ENG NE Emission Control (2UZ-FE) - Tundra
![](/vehicles/linovind/mig/whoceedonodb/cald.png)
a
Remove the 2 bolts
Fig. 78: Identifying Air Injection Control Driver Bolts (Bank 1)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the 2 screws and air injection control driver
Fig. 79: Identifying Air Injection Control Driver Screws (Bank 1)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
REMOVE AIR INJECTION CONTROL DRIVER (for Bank 2)
a
Remove the 2 screws and air injection control driver
Fig. 80: Identifying Air Injection Control Driver Screws (Bank 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REASSEMBLY
2009 Toyota Tundra
2009 ENG NE Emission Control (2UZ-FE) - Tundra
![](/vehicles/linovind/mig/whoceedonodb/yotho.png)
1
INSTALL AIR INJECTION CONTROL DRIVER (for Bank 2)
a
Install the air injection control driver with the 2 screws
Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf)
Fig. 81: Identifying Air Injection Control Driver Screws (Bank 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
INSTALL AIR INJECTION CONTROL DRIVER (for Bank 1)
a
Install the air injection control driver with the 2 screws
Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf)
Fig. 82: Identifying Air Injection Control Driver Screws (Bank 1)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Install the 2 bolts
Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
2009 Toyota Tundra
2009 ENG NE Emission Control (2UZ-FE) - Tundra
![](/vehicles/linovind/mig/whoceedonodb/harouta.png)
Fig. 83: Identifying Air Injection Control Driver Bolts (Bank 1)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSTALLATION
1
INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY
a
Install the air injection control driver assembly with the 3 bolts
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
Fig. 84: Identifying Air Injection Control Driver Assembly With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Connect the 2 wire harness clamps
Fig. 85: Identifying Wire Harness Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENG NE Emission Control (2UZ-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст