Toyota Tundra. Manual — part 2234
![](/vehicles/linovind/mig/oudithero/ugpe.png)
Fig. 239: Locating LH VVT Sensor Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. RH:
Remove the 2 bolts and 2 VVT sensors.
Fig. 240: Locating RH VVT Sensor Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
10. REMOVE CAMSHAFT POSITION SENSOR
a. Remove the bolt and camshaft position sensor.
Fig. 241: Locating Crankshaft Position Sensor Bolt
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
![](/vehicles/linovind/mig/oudithero/bincedauld.png)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
11. REMOVE CRANK POSITION SENSOR PROTECTOR
a. Remove the 2 bolts and sensor protector.
Fig. 242: Locating Crank Position Sensor Protector Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
12. REMOVE CRANKSHAFT POSITION SENSOR
a. Remove the bolt and crankshaft position sensor.
Fig. 243: Locating Crankshaft Position Sensor Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
13. REMOVE CAMSHAFT OIL CONTROL VALVE ASSEMBLY
a. LH:
Remove the 2 bolts and 2 oil control valves.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
![](/vehicles/linovind/mig/oudithero/myontu.png)
Fig. 244: Locating Camshaft Oil Control Valve And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. RH:
Remove the 2 bolts and 2 oil control valves.
Fig. 245: Locating Camshaft Oil Control Valve And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
14. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY LH (See REMOVAL )
15. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY RH (See REMOVAL )
16. REMOVE OIL CONTROL VALVE FILTER
a. LH:
Remove the 3 bolts, cylinder head cover spacer, gasket and valve filter.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
![](/vehicles/linovind/mig/oudithero/utriellit.png)
Fig. 246: Locating LH Oil Control Valve Filter Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. RH:
Remove the 3 bolts, cylinder head cover spacer, gasket and valve filter.
Fig. 247: Locating RH Oil Control Valve Filter Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
17. REMOVE SPARK PLUG TUBE GASKET
a. Bend the 4 ventilation baffle plate claws on the cylinder head cover to an angle of 90° or more.
b. Using a screwdriver, pry out the gaskets.
HINT:
Be careful not to damage the gasket when removing it, as the removed gasket needs to be
used when installing a new one.
Tape the screwdriver tip before use.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст