Toyota Sienna (2019 year). Instruction — part 23
SIENNA_OM_OM08025U_(U)
353
5-3. Using the storage features
5
In
WARNING
?
Console box adjustment precaution (type B)
?
Do not adjust the position of the console box while the vehicle is moving.
This may cause the driver to mishandle the vehicle and may lead to an
accident that results in death or serious injury.
?
Be careful not to get hands or feet pinched between the console box and
the rear sliding console or rear seat.
?
Be careful not to allow the console box to hit any passenger while adjust-
ing its position.
?
After adjusting the console box, make sure it is securely locked in position.
354
SIENNA_OM_OM08025U_(U)
5-3. Using the storage features
Cup holders
Front
Console box type A
(if equipped)
Press in and release the front cup
holder.
Console box type B
(if equipped)
Console box type C
(if equipped)
Pull the lid down.
Second seat (if equipped)
Rear
Removing the second center seat.
(
SIENNA_OM_OM08025U_(U)
355
5-3. Using the storage features
5
In
?
Cup holder light (console box type)
The cup holder light turns on when the headlight switch is on.
WARNING
Do not place anything other than cups or beverage cans in the cup holders.
Other items may be thrown out of the holders in the event of an accident or
sudden braking and cause injury. If possible, cover hot drinks to prevent
burns.
356
SIENNA_OM_OM08025U_(U)
5-3. Using the storage features
?
When storing a bottle, close the cap.
?
The bottle may not be stored depending on its size or shape.
Bottle holders
Front
Rear
II63SN007
WARNING
Do not place anything other than a bottle in the bottle holders.
Other items may be thrown out of the holders in the event of an accident or
sudden braking and cause injury.
NOTICE
Rear: Make sure items in the sliding door bottle holder will not interfere with
the motion of the door before operating the door. Items that protrude from
the bottle holder may prevent door opening or damage the vehicle.
SIENNA_OM_OM08025U_(U)
357
5-3. Using the storage features
5
In
Door pockets
Front
Rear
NOTICE
Rear: Make sure magazines are not bent
or protruding from the sliding door pock-
ets. Do not insert anything too big so that
the shape of the sliding door pockets is
distorted. Such objects may obstruct the
opening/closing of the sliding doors,
damage the sliding door pockets or the
vehicle body, and may result in a mal-
function.
358
SIENNA_OM_OM08025U_(U)
5-3. Using the storage features
Auxiliary boxes
Type A
Type B
Push the lid.
Push down the knob.
Type C (if equipped)
Type D
Type E (if equipped)
Type F
Lift the lid.
SIENNA_OM_OM08025U_(U)
359
5-3. Using the storage features
5
In
Type G (if equipped)
Type H (if equipped)
Removing the second center seat.
(
Type I (if equipped)
Type J (if equipped)
Type K (if equipped)
360
SIENNA_OM_OM08025U_(U)
5-3. Using the storage features
?
Coin holder (type B)
Nickels, quarters and dimes can be stored
separately.
WARNING
?
Maximum storage weight (type A)
Do not store items heavier than 0.4 lb. (200 g).
Doing so may cause the auxiliary box to open and the items inside may fall
out, resulting in an accident.
361
SIENNA_OM_OM08025U_(U)
5-3. Using the storage features
5
In
Luggage compartment features
Raise the hook to use.
The cargo hooks are provided for
securing loose items.
Raise the hook to use.
Cargo hooks
WARNING
To avoid injury, always return the cargo hooks to their positions when they
are not in use.
Cargo net hooks
Pattern 1
Pattern 2
NOTICE
To prevent damage to the cargo net hooks, avoid hanging things other than
a cargo net on them.
362
SIENNA_OM_OM08025U_(U)
5-3. Using the storage features
Engage the latch buckle.
Storage box (if equipped)
363
SIENNA_OM_OM08025U_(U)
5-4. Using the other interior features
5
In
Other interior features
To set the visor in the forward
position, flip it down.
To set the visor in the side posi-
tion, flip down, unhook, and
swing it to the side.
To use the side extender, place
the visor in the side position,
then slide it backward.
Open the cover.
The light turns on when the cover
is opened.
?
To prevent battery discharge
If the vanity lights remain on for 20 minutes while the engine is off, the lights
will turn off automatically.
Sun visors
1
2
3
Vanity mirrors
364
SIENNA_OM_OM08025U_(U)
5-4. Using the other interior features
Push the lid and allow the lid to
open.
Push the lid. To first locked
position.
Conversation mirror
1
2
SIENNA_OM_OM08025U_(U)
365
5-4. Using the other interior features
5
In
The power outlet can be used for the following components:
12 V: Accessories that run on less than 10 A
120 V AC: Accessories that use less than 100 W
?
12 V
Open the cover.
Power outlets
Center panel type A
Center panel type B
Luggage compartment
366
SIENNA_OM_OM08025U_(U)
5-4. Using the other interior features
?
120 V AC (if equipped)
Open the cover.
Power outlet socket console
box type A
Power outlet socket console
box type B
Power outlet socket luggage
compartment
SIENNA_OM_OM08025U_(U)
367
5-4. Using the other interior features
5
In
?
The power outlet can be used when
Vehicles without a smart key system
12 V: The engine switch is in the “ACC” or “ON” position.
120 V AC: The engine switch is in the “ON” position.
Vehicles with a smart key system
12 V: The engine switch is in ACCESSORY or IGNITION ON mode.
120 V AC: The engine switch is in IGNITION ON mode.
NOTICE
?
To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that enter the power outlet may cause a short cir-
cuit.
?
To prevent blown fuse
12 V
Do not use an accessory that uses more than 12 V 10 A.
120 V AC
Do not use a 120 V AC appliance that requires more than 100 W.
If a 120 V AC appliance that consumes more than 100 W is used, the pro-
tection circuit may cut the power supply.
?
To prevent battery discharge
Do not use the power outlet longer than necessary when the engine is not
running.
?
Appliances that may not operate properly (120 V AC)
The following 120 V AC appliances may not operate properly even if their
power consumption is under 100 W:
?
Appliances with high initial peak wattage
?
Measuring devices that process precise data
?
Other appliances that require an extremely stable power supply
368
SIENNA_OM_OM08025U_(U)
5-4. Using the other interior features
The USB charging ports are used to supply 2.1 A of electricity at 5 V
to external devices.
The USB charging ports are for charging only. They are not designed
for data transfer or other purposes.
Depending on the external device, it may not charge properly. Refer to
the manual included with the device before using a USB charging
port.
?
Using the USB charging ports
USB charging ports
Center panel (if equipped)
Console box type A
(if equipped)
Open the lid
Open the lid
Console box type B
(if equipped)
Auxiliary box (third seat left-
hand side)
Open the lid
Open the auxiliary box lid and
open the lid.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст