Kia Carnival (2007 year). Manual — part 545

(4) Lightly tap the end of each valve stem two or three times with the wooden handle of a hammer to ensure

proper seating of the valve and retainer lock.

2. Install MLAs.

Check that the MLA rotates smoothly by hand.

MLA can be reinstalled in its original position.

3. Install OCV(A).

Tightening torque
9.80 ~ 11.76Nm(1.0 ~ 1.2kgf.m, 7.23 ~ 8.68lb-ft)

a. To install OCV with gray colored connector into RH bank.
b. To install OCV with black colored connector into LH bank.

a. Do not reuse the OCV when dropped.
b. Keep the OCV assembly clean.
c. Do not hold the OCV sleeve during servicing.
d. When the OCV is installed on the engine, do not move the engine by holding the OCV yoke.

Engine

And

Transaxle Assembly

2007 > 3.8L V6 GASOLINE >

REMOVAL

a. Use fender covers to avoid damaging painted surfaces.
b. To avoid damage, unplug the wiring connectors carefully while holding the connector portion.

a. Mark all wiring and hoses to avoid misconnection.

1. Remove the engine cover(A).

2. Recover refrigerant, opening the high & low pressure pipe caps and connecting the refrigerant station(Refer to HA

group).

3. Disconnect the neagative terminal from the battery and remove the battery(A).

4. Remove the intake air hose and air cleaner assembly.

(1) Disconnect the MAF connector(A).

(2) Disconnect the breather hose(B) from air cleaner hose.

(3) Remove the intake air hose and air cleaner assembly(C).