Kia Carnival (2007 year). Manual — part 119
Tightening torque Nm (kgf.m, lb-ft):
100 ~ 120 (10.0 ~12.0, 72 ~ 87)
INSTALLATION
1. Installation is reverse of the removal.
a. The driveshaft lock nut should be replaced with new ones.
b. After installation driveshaft lock nut, stake the lock nut using a chisel and hammer as shown in the
illustration below.
DISASSEMBLY
1. Separate the hub & bearing assembly (A) from the knuckle (B) by loosening the bolts.
Tightening torque Nm (kgf.m, lb-ft):
160 ~ 180 (16.0 ~ 18.0, 116 ~ 130)
INSPECTION
1. Check the hub for cracks and the splines for wear.
2. Check the brake disc for scoring and damage.
3. Check the knuckle for cracks.
REASSEMBLY
1. Reassembly is reverse of the disassembly.
2. Measure the wheel bearing starting toque.
20 kgf.cm or less
3. Measure the hub assembly axial play using a dial gauge.
0.008 mm or less
Rear Axle Assembly
2007 > 2.7L V6 GASOLINE >
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст