Kia Carnival (2007 year). Manual — part 110

12. Install the power steering return tube mounting bolt(A).

13. Install the front roll stopper mounting bolt(A).

14. Connect the lower arm, the rod end ball joint, the stabilizer bar link to the front knuckle.(see SS group)

15. Install the hanger(A).

16. Refill the transaxle with fluid.

17. Connect the power steering pressure hose (A) to the power steering oil pump.

18. Connect the power steering return hose(A). (see ST group)

19. Install the under cover(A).

20. Install the steering column joint bolt.(See ST group).

21. Install the front wheels and tires. (see SS group)

22. Install the transaxle insulator and mounting bracket (B) by tightening the bolts (A).

TORQUE:
60~80 Nm (6~8 kgf.m, 43.6~58.2 lb-ft)

23. remove the SST (09200-38001) holding the engine and transaxle assembly.

TORQUE:
65~85 Nm (6.5~8.5kgf.m, 47.0~61.5 lb-ft)

24. Install the transaxle upper mounting bolts(A).

TORQUE:
65~85Nm(6.5~8.5kgf.m, 47.0~61.5lb-ft)

25. Install the C.S.C (Cincentric Slave Cylinder) tube(A) by tightening the nut(B).

26. Install the wire harness bracket(b).

27. Install the shift cable assembly (A) with the clips(B) and pins(C).

28. Install the vehicle speed sensor connector (A) and the back up lamp switch(B).

29. Install the battery tray(B) by removing the four mounting bolts(A).