Kia Carnival (2007 year). Manual — part 508

9. Disconnect the transaxle oil cooler hoses (A) from the tubes (C) by loosening the clamps (B).

10. Remove the transaxle mounting bolts (A).

[2.9 DSL]

[3.8 GSL]

11. Using the SST(09200-38001), hold the engine and transaxle assembly safely.

[2.9 DSL]

[3.8 GSL]

12. Remove the transaxle insulator mounting bolt (A).

13. Remove the front wheels.

14. Remove the power steering column joint bolt. (see ST group)

15. Lift up the vehicle.

16. Remove the under cover (A).

17. Drain transaxle oil.

18. Drain power steering oil through the return tube. (see ST group)

19. Disconnect the power steering pressure tube (A) from the power steering oil pump.

20. Disconnect the lower arm, the tie rod end ball joint, the stabilizer bar link from the front knuckle. (see SS group)

21. Remove the roll stopper mounting bolts (A,B).

22. Remove the mounting bolts from the sub frame by supporting the sub frame with a jack. (see SS group)

23. Remove drive shaft from transaxle. (See DS group).

24. Install a jack for supporting the transaxle assembly.

25. Remove the plate (A) and the drive plate bolts (B).

[2.9 DSL]

[3.8 GSL]

26. Lifting the vehicle up and lowering the jack slowly, remove the transaxle assembly.

INSTALLATION

Installation is in the reverse order of removal.
Perform the following :

a. Adjust the shift cable.
b. Refill the transaxle with fluid.
c. Refill the radiator with engine coolant.
d. Bleed air from the cooling system with the heater valve open.