Kia Carnival (2007 year). Manual — part 239
![](/vehicles/jado/eand/bondeakie/rora.png)
2007 > 2.7L V6 GASOLINE >
COMPONENTS
![](/vehicles/jado/eand/bondeakie/ystravecho.png)
2007 > 2.7L V6 GASOLINE >
REMOVAL
1. Remove the front wheel speed sensor mounting bolt (A) and the wire bracket mounting bolt (B)..
2. Remove the wire bracket bolt (A).
3. Remove the front wheel guard.
4. Remove the front wheel speed sensor after disconnecting the wheel speed sensor connector (A).
INSPECTION
1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
In order to protect the wheel speed sensor, when measuring output voltage, a 75
Ω resistor must be used as
shown.
![](/vehicles/jado/eand/bondeakie/rakuised.png)
2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage
as shown below.
a. V_low : 0.44 V ~ 0.63 V
b. V_high : 0.885 V ~ 1.26 V
c. Frequency range : 1~2,500 Hz
Rear Wheel Speed Sensor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст