Kia Carnival (2007 year). Manual — part 571
![](/vehicles/jado/eand/bondeakie/ame.png)
3. Disconnect the battery from the M terminal.
If the pinion does not retract, the hold-in coil is working properly. To avoid damaging the starter, do not leave the
battery connected for more than 10 seconds.
4. Disconnect the battery also from the body. If the pinion retracts immediately, it is working properly. To avoid
damaging the starter, do not leave the battery connected for more than 10 seconds.
FREE RUNNING TEST
1. Place the starter motor in a vise equipped with soft jaws and connect a fully-charged 12-volt battery to starter
motor as follows.
2. Connect a test ammeter (100-ampere scale) and carbon pile rheostats as shown in the illustration.
3. Connect a voltmeter (15-volt scale) across starter motor.
4. Rotate carbon pile to the off position.
5. Connect the battery cable from battery's negative post to the starter motor body.
6. Adjust until battery voltage shown on the voltmeter reads 11volts.
7. Confirm that the maximum amperage is within the specifications and that the starter motor turns smoothly and
freely.
Current : 85A MAX
Speed : 2,600 rpm
Starter
![](/vehicles/jado/eand/bondeakie/ioou.png)
2007 > 2.7L V6 GASOLINE >
COMPONENT
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст