Kia Carnival (2007 year). Manual — part 177
2007 > 2.7L V6 GASOLINE >
DESCRIPTION
1. Humidity sensor is located at the lower crush pad and detected in-car humidity for in-car humidity control.
2. If ambient air temperature or in-car humidity is outside certain range, it will turn on A/C to control in-car humidity
preventing in car fogging.
Air conditioner operation depends on ambient temperature and humidity.
2007 > 2.7L V6 GASOLINE >
INSPECTION
1. Ignition "ON"
2. Using the scan tool.
3. Check the frequency of humidity sensor between terminals 2 and 3.
Humidity (%)
Frequency between terminals 2and 3 (Hz)
30
6976 ± 5%
50
6728 ± 5%
60
6600 ± 5%
70
6468 ± 5%
80
6330 ± 5%
90
6186 ± 5%
4. If the measured resistance is not specification, substitute with a known-good humidity sensor and check for proper
operation.
5. If the problem is corrected, replace the Humidity sensor.
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the center facia lower panel (A). (Refer to BD group)
3. Disconnect the humidity sensor connector (A).
4. Loosen 2 screws and then remove the humidity sensor (B).
5. Installation is the reverse order of removal.
Heater
2007 > 2.7L V6 GASOLINE >
COMPONENT LOCATION
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст