Kia Carnival (2007 year). Manual — part 473
15. Install the drive belt auto-tensioner (A).
Tightening torque :
15.7~22.6Nm (1.6 ~ 2.3kgf.m, 11.6 ~ 16.6lb-ft)
16. Install the crankshaft pulley bolt(A), washer(B) and crankshaft pulley (A).
Tightening torque :
376.6~411.9Nm (38.4~42.0kgf.m, 277.7~303.8lb-ft)
Using the special tool(09517-21700, 09231-H1000).
17. Install the bolts(B), nut(C) and timing belt upper cover (A).
Tightening torque :
6.9~9.8Nm (0.7 ~ 1.0kgf.m, 5.1 ~ 7.2lb-ft)
18. Install the water pump pulley.
Tightening torque :
5.9~9.8Nm (0.6 ~ 1.0kgf.m, 4.3 ~ 7.2lb-ft)
19. Install the drive belt.
20. Check that the 'A' part of the drivebelt auto-tensioner is aligned as shown below. If not, replace the drivebelt.
21. Install the engine support bracket(A).
Tightening torque :
49.0~63.7Nm (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
22. Install the engine mounting (A).
Tightening torque :
88.3~107.9Nm (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
23. Remove the jack for oil pan.
24. Install the battery terminals (A).
INSPECTION
SPROCKETS, TENSIONER, IDLER
1. Check the camshaft sprocket, crankshaft sprocket, tensioner pulley, and idler pulley for abnormal wear, cracks, or
damage. Replace as necessary.
2. Inspect the tensioner pulley and the idler pulley for easy and smooth rotation and check for play or noise. Replace
as necessary.
3. Replace the pulley if there is a grease leak from its bearing.
TIMING BELT
1. Check the belt for oil or dust deposits.
Replace, if necessary.
Small deposits should be wiped away with a dry cloth or paper. Do not clean with solvent.
2. When the engine is overhauled or belt tension adjusted, check the carefully. If any of the following flaws are
evident, replace the belt.
a. Do not bend, twist or turn the timing belt inside out.
b. Do not allow timing belt to come into contact with oil, water and steam.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст