Kia Carnival (2007 year). Manual — part 389

No.

Operation

SW

Lever

L

R

Manipulation

Result

1

Basic

Operation

LH

P

Position A

Position

B

Changing the shift
lever from "P" to
"R"

MIR L:Auto reverse to position (A-
5°)
MIR R:Auto reverse to position (B-
5°)

2

RH

P

Position A

Position

B

MIR L:NO change
MIR R:Auto reverse to position (B-
5°)

3

N

P

Position A

Position

B

MIR L:NO change
MIR R:NO change

4

Returning after

Basic

Operation

LH

R

Result of

No.1

Result of

No.2

Changing the shift
lever from "R" to
"P"

MIR L:Return to position (A)
MIR R:Return to position (B)

5

RH

R

No.1 is

being

performed

Result of

No.2

MIR L:NO change
MIR R:Return to position (B)

FAIL SAFE FUNCTION

1. If the sensor does not move more than 60mV for the input changes (5 second operation) of the position sensor

although the motor is operating, automatic control will stop.

2. The mirror operation signal cannot be displayed into the same direction for more than 15 seconds. (When the

mirror is replacing to the saved position or the switch is manually pressed)

3. Monitoring the replacing time

a. If the replacing operation does not stop within 40 seconds, the mirror motor will not outputted and the replacing

operation will stop.

IMS SWITCH

1. If it's satisfied with the followings

(1) Can communication Data ignition switch sent by IPM is "RUN"

(2) Can communication Data Inhibit switch sent by FAM is "P"

(3) Can communication Data vehicle speed sent by CLUSTER is under "3Km/h"

2. If SET switch is ON, IMS message is SET.

3. If POSITION switch is ON within 5sec since SET switch is ON, IMS message will be sent to MEMORY1 or

MEMORY2.

SEAT MANUAL SWiITCH

If Seat switch is controlled, seat control message is sent to seat.

COURTESY LAMP

1. If driver's door is opened, RAM changes door open Message to ON and Courtesy lamp is ON by DDM.

2. If driver's door is closed, RAM changes door open Message to Off and Courtesy lamp is OFF gradually by

DDM.(5±0.5sec)

3. During dim out, If IGN changes to ON or door is closed while Ignition switch is ON, Courtesy lamp is OFF

immediately.

4. If Key reminder switch is OFF and door is opened for 20min, Courtesy lamp is OFF immediately.

FUEL FILLER DOOR OPEN

When the fuel filler door open switch is turned on, this data is uploaded to the bus through CAN communication.

DEFOG CONTROL (O/S MIRROR HEAT LINE)

If rear defog switch is on while IGN is ON, rear defog control of IPM is ON and O/S Mirror Defog is ON by DDM,ADM.

RESCUE MODE

1. The condition to run RESCUE MODE is listed below.

a. Ignition switch Message is in RUN or IGN switch is ON.

b. Any signal received from of park tail head lamp, front wiper control message is received as INVALID or CAN

line from IPM is not normal.

c. Drive door courtesy lamp control message is sent as INVALID or Can Line from RAM is not normal

2. If RESCUE MODE runs, operation is as follows.

a. Door unlock is ON for 0.5sec

b. OSRVM Defogger is ON for 20min.

c. Illumination is ON continuously.

d. Other functions are the same as NORMAL mode.

3. If Ignition switch Message is OFF/ACC or IGN switch is OFF or can line from IPM,FAM,RAM is normal, Rescue

mode is stopped.

Assist Door Module

2007 > 2.7L V6 GASOLINE >

COMMUNICATION DIAGRAM

Была ли эта страница вам полезна?
Да!Нет
7 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности