Freightliner Business Class M2. Manual — part 4
![](/vehicles/itar/lers/peyo/swa.png)
NOTE: The M3 Maintenance Operations include the
maintenance operations in
and all of the
maintenance operations in
, M1 Maintenance
Operations, and
, M2 Maintenance Opera-
tions.
M3 Maintenance Operations
Maintenance
Operation No.
Title of Maintenance Operation
Perform All M1 Maintenance Operations
Perform All M2 Maintenance Operations
Engine Drive Belt Inspecting
Allison Transmission Fluid and Filter Changing
Suspension U-Bolt Torque Checking
Draw Key Nut Torque Checking
Wheel Nut Checking
Air Brake Inspection and Leak Test
Drag Link Inspecting
LNG Vacuum Integrity Testing
HVAC Air Filter Replacing
*
*
Replace the HVAC air filter at the recommended interval or every six months.
Table 8, M3 Maintenance Operations
General Information
00
M3 Maintenance Operations: 00–09
Business Class M2 Maintenance Manual, March 2016
00/12
![](/vehicles/itar/lers/peyo/qusse.png)
NOTE: The M4 Maintenance Operations include the
maintenance operations in
and all of the
maintenance operations in
, M1 Maintenance
Operations,
, M2 Maintenance Operations,
and
, M3 Maintenance Operations.
M4 Maintenance Operations
Maintenance
Operation No.
Title of Maintenance Operation
Perform All M1 Maintenance Operations
Perform All M2 Maintenance Operations
Perform All M3 Maintenance Operations
Engine Support Fastener Checking
Air Cleaner Element Inspecting and Replacing
Alternator, Battery, and Starter Checking
Radiator Pressure Flushing and Coolant Changing
Hybrid Electric System Coolant Changing
Frame Fastener Torque Checking
Axle Lubricant Changing and Magnetic Plug Cleaning
Governor D–2A Check
Power Steering Fluid Changing
Fuel/Water Separator Element Replacing
Mirror Folding Check
Table 9, M4 Maintenance Operations
General Information
00
M4 Maintenance Operations: 00–10
Business Class M2 Maintenance Manual, March 2016
00/13
![](/vehicles/itar/lers/peyo/fee.png)
NOTE: The M5 Maintenance Operations include the
maintenance operations in
and all of the
maintenance operations in
, M1 Maintenance
Operations,
, M2 Maintenance Operations,
, M3 Maintenance Operations, and
M4 Maintenance Operations.
M5 Maintenance Operations
Maintenance
Operation No.
Title of Maintenance Operation
Perform All M1 Maintenance Operations
Perform All M2 Maintenance Operations
Perform All M3 Maintenance Operations
Perform All M4 Maintenance Operations
Clutch Hydraulic Fluid Changing
Mercedes-Benz Transmission Fluid Changing and Magnetic Plug
Cleaning
Mercedes-Benz Transmission Leak Checking
Bendix Air Dryer Desiccant Replacement
Bendix E-6 Foot Control Valve Inspection and Lubrication
WABCO System Saver Air Dryer Desiccant Cartridge Replacement
Power Steering Filter Changing
CAT CGI Bellows Replacement
Table 10, M5 Maintenance Operations
General Information
00
M5 Maintenance Operations: 00–11
Business Class M2 Maintenance Manual, March 2016
00/14
![](/vehicles/itar/lers/peyo/xsthoumadaak.png)
, MOP 00-12, lists the lubrication and fluid
level check maintenance operations that must be
performed at the M1 Maintenance Interval.
MOP 00-12, M1 Lubrication and Fluid Level Check
Maintenance
Operation No.
Title of Maintenance Operation
Eaton Fuller Clutch Release Bearing Lubricating
Eaton Fuller Clutch Release Cross-Shaft Lubricating
Clutch Hydraulic Fluid Level Checking
Transmission Fluid Level Checking
Fifth Wheel Lubricating
Trailer Electrical Connector Lubricating
Suspension Lubricating
Kingpin Lubricating
*
Tie Rod End Lubricating
*
Axle Lubricant Level Checking
Driveline Lubricating
Dana Spicer, Haldex, and Gunite Slack Adjuster Lubrication
Meritor Slack Adjuster Lubrication
Versajust Slack Adjuster Inspection and Lubrication
†
Power Steering Fluid Level Inspecting
Power Steering Gear Lubricating
Drag Link Lubricating
Door Seals Lubricating
Hood Rear Support Lubrication
*
For Detroit axles, complete this procedure once a year or at the following applicable interval, whichever comes
first: every 5000 miles (8000 km) for Schedule I vehicles; every 25,000 miles (40 000 km) for Schedule II vehicles;
or every 100,000 miles (161 000 km) for Schedule III vehicles.
†
Complete this procedure every 25,000 miles (40 225 km), 3 months, or 500 operating hours, whichever comes
first.
Table 11, MOP 00-12, M1 Lubrication and Fluid Level Check
General Information
00
M1 Lubrication and Fluid Level Check: 00–12
Business Class M2 Maintenance Manual, March 2016
00/15
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст