Nissan Altima HL32 Hybrid. Manual — part 36
![](/vehicles/gon/sttello/nita/mutho.png)
AV-136
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITHOUT NAVIGATION]
REAR SPEAKER
REAR SPEAKER
Removal and Installation
INFOID:0000000004486420
REMOVAL
1. Remove the rear parcel shelf finisher. Refer to
INT-19, "Removal and Installation"
.
2. Remove the rear speaker screws (A), then disconnect the rear
speaker connector and remove the rear speaker (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0042ZZ
![](/vehicles/gon/sttello/nita/zin.png)
AV
SATELLITE RADIO TUNER
AV-137
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SATELLITE RADIO TUNER
Removal and Installation
INFOID:0000000004219479
REMOVAL
1. Disconnect the 12-volt battery negative terminal.
2. Remove the rear parcel shelf finisher. Refer to
INT-19, "Removal and Installation"
.
3. Remove the satellite radio tuner unit screws (A), disconnect the
satellite tuner harness connectors and remove the satellite radio
tuner (1).
NOTE:
Bluetooth control unit (2) is removed with the satellite radio tuner
unit (if equipped).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0055ZZ
![](/vehicles/gon/sttello/nita/meserrg.png)
AV-138
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITHOUT NAVIGATION]
AUDIO ANTENNA
AUDIO ANTENNA
Location of Antennas
INFOID:0000000004219480
Roof Antenna
INFOID:0000000004490970
REMOVAL AND INSTALLATION
Removal
1. Remove the rear parcel shelf finisher. Refer to
INT-19, "Removal and Installation"
.
2. Remove the rear assist grips. Refer to
INT-23, "Removal and Installation"
.
3. Pull down headlining (rear) and obtain space work between roof and headlining.
ALNIA0125ZZ
1.
Audio unit harness connector
2.
Audio unit harness
3.
Audio unit
4.
Roof antenna rod
5.
Roof antenna base
6.
Antenna feeder (to audio unit)
7.
Satellite feeder
8.
Window antenna
9.
Satellite radio tuner
![](/vehicles/gon/sttello/nita/lorin.png)
AV
AUDIO ANTENNA
AV-139
< ON-VEHICLE REPAIR >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
4. Remove the roof antenna nut (A), then disconnect the antenna
feeder connector (B) and remove the antenna feeder (1) from
the roof.
5. Detach the antenna feeder harness wire clips, then disconnect
the antenna feeder harness wire end and feed the antenna
feeder harness through the roof to remove the roof antenna
base.
Installation
Installation is in the reverse order of removal.
Window Antenna Repair
INFOID:0000000004490971
ELEMENT CHECK
1. Attach probe circuit tester (ohm setting) to antenna terminal on
each side.
• When measuring continuity, wrap tin foil around the top of
probe. Then, press the foil against the wire with your finger.
ALNIA0127ZZ
SEL250I
SEL122R
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст