Nissan March K13. Manual — part 663
WCS
SYSTEM
WCS-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TIMING CHART
SOUND SPECIFICATION
JSNIA2429GB
JSNIA3092GB
WCS-14
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
DIAGNOSIS SYSTEM (COMBINATION METER)
CONSULT-III Function
INFOID:0000000005904784
APPLICATION ITEMS
CONSULT-III can perform the following diagnosis modes via CAN communication and the combination meter.
SELF DIAG RESULT
.
DATA MONITOR
Display Item List
X: Applicable
System
Diagnosis mode
Description
METER/M&A
Self Diagnostic Result
The combination meter checks the conditions and displays memorized errors.
Data Monitor
Displays the combination meter input/output data in real time.
Special function
Lighting history of the warning lamp and indicator lamp can be checked.
Display item [Unit]
MAIN
SIGNALS
Description
SPEED METER
[km/h]
X
• Value of vehicle speed signal received from ABS actuator and electric unit (con-
trol unit) via CAN communication. (Models with ABS)
NOTE:
655.35 is displayed when the malfunction signal is received.
• Value of vehicle speed signal received from TCM via CAN communication. (A/
T models without ABS)
NOTE:
655.35 is displayed when the malfunction signal is received.
• Value of vehicle speed sensor signal received from vehicle speed sensor. (M/T
models)
SPEED OUTPUT
[km/h]
X
Vehicle speed signal value transmitted to other units via CAN communication.
NOTE:
655.35 is displayed when the malfunction signal is received.
ODO OUTPUT
[km/h or mph]
Odometer signal value transmitted to other units via CAN communication.
TACHO METER
[rpm]
X
Value of the engine speed signal received from ECM via CAN communication.
NOTE:
8191.875 is displayed when the malfunction signal is received.
FUEL METER
[L]
X
Fuel level indicated on combination meter.
W TEMP METER
[
°
C]
X
Value of engine coolant temperature signal is received from ECM via CAN com-
munication.
NOTE:
215 is displayed when the malfunction signal is input.
ABS W/L
[On/Off]
Status of ABS warning lamp detected from ABS warning lamp signal is received
from ABS actuator and electric unit (control unit) via CAN communication.
BRAKE W/L
[On/Off]
Status of brake warning lamp detected from brake warning lamp signal is received
from ABS actuator and electric unit (control unit) via CAN communication.
NOTE:
Displays “Off” if the brake warning lamp is illuminated when the valve check starts,
the parking brake switch is turned ON or the brake fluid level switch is turned ON.
DOOR W/L
[On/Off]
Status of door warning detected from door switch signal received from BCM via
CAN communication.
HI-BEAM IND
[On/Off]
Status of high beam indicator lamp detected from high beam request signal is re-
ceived from BCM via CAN communication.
TURN IND
[On/Off]
Status of turn indicator lamp detected from turn indicator signal is received from
BCM via CAN communication.
WCS
DIAGNOSIS SYSTEM (COMBINATION METER)
WCS-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FR FOG IND
[On/Off]
Status of front fog lamp indicator lamp detected from front fog light request signal
is received from BCM via CAN communication.
OIL W/L
[On/Off]
Status of oil pressure warning lamp detected from oil pressure switch signal is re-
ceived from BCM via CAN communication.
MIL
[On/Off]
Status of malfunction indicator lamp detected from malfunctioning indicator lamp
signal is received from ECM via CAN communication.
GLOW IND
[Off]
This item is displayed, but cannot be monitored.
C-ENG2 W/L
[Off]
This item is displayed, but cannot be monitored.
CRUISE IND
[Off]
This item is displayed, but cannot be monitored.
SET IND
[Off]
This item is displayed, but cannot be monitored.
O/D OFF IND
[On/Off]
Status of OD OFF indicator lamp detected from OD OFF indicator lamp signal is
received from TCM via CAN communication.
FUEL W/L
[On/Off]
Low-fuel warning status detected by the identified fuel level.
KEY G/Y W/L
[On/Off]
Status of KEY warning lamp (Green/Yellow) detected from KEY warning lamp sig-
nal is received from BCM via CAN communication.
EPS W/L
[On/Off]
Status of EPS warning lamp detected from EPS warning lamp signal is received
from EPS control unit via CAN communication.
e-4WD W/L
[Off]
This item is displayed, but cannot be monitored.
DPF W/L
[Off]
This item is displayed, but cannot be monitored.
FILTER W/L
[Off]
This item is displayed, but cannot be monitored.
LCD
[B&P N, B&P I, SFT P, NO KY]
Status of engine start operation indicator, shift P warning lamp and KEY warning
lamp, detected from engine start operation indicator signal, shift P warning lamp
signal and KEY warning lamp signal are received from BCM via CAN communi-
cation.
SHIFT IND
[P, R, N, D, 2, 1]
Status of shift position, detected from shift position signal received from TCM via
CAN communication.
O/D OFF SW
[On/Off]
Status of over drive control switch.
COMP F/B SIG
[On/Off]
A/C compressor activation condition that ECM judges according to the engine
coolant temperature and the acceleration degree.
PKB SW
[On/Off]
Status of parking brake switch.
BUCKLE SW
[On/Off]
This item is displayed, but cannot be monitored.
BRAKE SW
[On/Off]
This item is displayed, but cannot be monitored.
BRAKE OIL SW
[On/Off]
Status of brake fluid level switch.
DISTANCE
[km]
Value of possible driving distance calculated by combination meter.
FUEL LOW SIG
[On/Off]
Status of fuel level low warning signal to output to AV control unit via CAN com-
munication.
BUZZER
[On/Off]
X
Buzzer status (in the combination meter) is detected from the buzzer output signal
received from each unit via CAN communication and the warning output condition
of the combination meter.
Display item [Unit]
MAIN
SIGNALS
Description
WCS-16
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
NOTE:
Some items are not available according to vehicle specification.
SPECIAL FUNCTION
Special menu
W/L ON HISTORY
• Stores histories when warning/indicator lamp is turned on.
• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
Display Item
Display item
Description
W/L ON HISTORY
Lighting history of warning lamp and indicator lamp can be checked.
Display item
Description
ABS W/L
Lighting history of ABS warning lamp.
VDC/TCS IND
This item is displayed, but cannot be monitored.
SLIP IND
This item is displayed, but cannot be monitored.
BRAKE W/L
Lighting history of brake warning lamp. (With ABS)
DOOR W/L
Lighting history of door warning lamp.
TRUNK/GLAS-H
This item is displayed, but cannot be monitored.
OIL W/L
Lighting history of oil pressure warning lamp.
C-ENG W/L
Lighting history of malfunction indicator lamp.
C-ENG2 W/L
This item is displayed, but cannot be monitored.
CRUISE IND
This item is displayed, but cannot be monitored.
SET IND
This item is displayed, but cannot be monitored.
CRUISE W/L
This item is displayed, but cannot be monitored.
BA W/L
This item is displayed, but cannot be monitored.
O/D OFF IND
Lighting history of OD OFF indicator lamp.
ATC/T-AMT W/L
This item is displayed, but cannot be monitored.
ATF TEMP W/L
This item is displayed, but cannot be monitored.
CVT IND
This item is displayed, but cannot be monitored.
SPORT IND
This item is displayed, but cannot be monitored.
4WD W/L
This item is displayed, but cannot be monitored.
FUEL W/L
Lighting history of low fuel level warning lamp.
WASHER W/L
This item is displayed, but cannot be monitored.
AIR PRES W/L
This item is displayed, but cannot be monitored.
KEY G/Y W/L
Lighting history of KEY warning lamp (Green/Yellow).
KEY R W/L
This item is displayed, but cannot be monitored.
KEY KNOB W/L
This item is displayed, but cannot be monitored.
EPS W/L
Lighting history of EPS warning lamp.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст