Nissan March K13. Manual — part 96
KEY REMINDER FUNCTION DOES NOT OPERATE
DLK-95
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY REMINDER FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005948946
1.
CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.
2.
Select “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT” mode.
3.
Check “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.
Refer to
DLK-24, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “On” in “ANTI KEY LOCK IN FUNCTI”.
2.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-58, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK UNLOCK SENSOR
Check unlock sensor.
Refer to
DLK-77, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
• Replace BCM. Refer to
BCS-57, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
DLK-96
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
OFF POSITION WARNING DOES NOT OPERATE
OFF POSITION WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005948947
1.
CHECK COMBINATION METER BUZZER
Check combination meter buzzer.
Refer to
DLK-82, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-79, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-58, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BCM
• Replace BCM. Refer to
BCS-57, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
P POSITION WARNING DOES NOT OPERATE
DLK-97
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
P POSITION WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005948948
1.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-79, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK COMBINATION METER BUZZER
Check combination meter buzzer.
Refer to
DLK-82, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-58, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK KEY WARNING LAMP
Check key warning lamp.
Refer to
DLK-83, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CHECK SHIFT P WARNING LAMP
Check shift P warning lamp.
Refer to
MWI-17, "On Board Diagnosis Function"
.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunctioning parts.
7.
REPLACE BCM
• Replace BCM. Refer to
BCS-57, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
DLK-98
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
ACC WARNING DOES NOT OPERATE
ACC WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005948949
1.
CHECK COMBINATION METER BUZZER
Check combination meter buzzer.
Refer to
DLK-82, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
• Replace BCM. Refer to
BCS-57, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст