Nissan March K13. Manual — part 318
EXL-98
< REMOVAL AND INSTALLATION >
REAR COMBINATION LAMP
REAR COMBINATION LAMP
Exploded View
INFOID:0000000005912496
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000005912497
CAUTION:
1.
Grommet
2.
Rear combination lamp
JMLIA1034ZZ
1.
Stop/tail lamp bulb
2.
Rear turn signal lamp bulb
3.
Reverse lamp bulb
4.
Bulb holder
5.
Seal packing
Refer to
for symbols in the figure.
JMLIA1035ZZ
REAR COMBINATION LAMP
EXL-99
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
• Disconnect the battery negative terminal or the fuse.
• Wrap the tip of remover tool with a cloth to protect the body from damage.
REMOVAL
1.
Remove rear combination lamp mounting bolts.
2.
Pull rear combination lamp toward rear of the vehicle.
3.
Disconnect rear combination lamp connector, and then remove rear combination lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000005912498
CAUTION:
• Disconnect the battery negative terminal or the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
STOP/TAIL LAMP BULB
1.
Remove rear combination lamp assembly.
2.
Disengage fixing pawls, and then remove bulb holder.
3.
Rotate stop/tail lamp bulb counterclockwise, and then remove stop/tail lamp bulb.
REAR TURN SIGNAL LAMP BULB
1.
Remove rear combination lamp assembly.
2.
Disengage fixing pawls, and then remove bulb holder.
3.
Rotate rear turn signal lamp bulb counterclockwise, and then remove rear turn signal lamp bulb.
BACK-UP LAMP BULB
1.
Remove rear combination lamp assembly.
JMLIA1041ZZ
JMLIA1041ZZ
EXL-100
< REMOVAL AND INSTALLATION >
REAR COMBINATION LAMP
2.
Disengage fixing pawls, and then remove bulb holder.
3.
Rotate back-up lamp bulb counterclockwise, and then remove back-up lamp bulb.
JMLIA1041ZZ
HIGH-MOUNTED STOP LAMP
EXL-101
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000005912502
Removal and Installation
INFOID:0000000005912503
CAUTION:
Disconnect battery negative terminal or remove the fuse.
REMOVAL
1.
Disengage high-mounted stop lamp fixing pawls with remover
tool (A).
CAUTION:
• Apply protect tape (B) on back door to protect the painted
surface from damage.
• Never insert remover tool in the back door glass side to
prevent damage of back door glass.
2.
Pull the high-mounted stop lamp toward rear of the vehicle.
1.
Back door
2.
Grommet
3.
High-mounted stop lamp socket
4.
High-mounted stop lamp bulb
5.
Seal packing
6.
High-mounted stop lamp
Refer to
XX-XX, "*****"
for symbols in the figure.
JMLIA1036ZZ
: Metal clip
JMLIA1021ZZ
JMLIA1022ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст