Nissan Quest E52. Manual — part 420
DLK-394
< SYMPTOM DIAGNOSIS >
BACK DOOR AUTO CLOSURE FUNCTION DOES NOT OPERATE
3.
REPLACE BACK DOOR CONTROL UNIT
1.
Replace back door control unit.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
CLOSURE FUNCTION
CLOSURE FUNCTION : Description
INFOID:0000000009649361
Back door auto closure does not operate when back door closing operation is performed.
CLOSURE FUNCTION : Diagnosis Procedure
INFOID:0000000009649362
1.
CHECK HALF LATCH SWITCH
Check half latch switch.
Refer to
DLK-294, "WITHOUT AUTOMATIC BACK DOOR : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK OPEN SWITCH
Check open switch.
Refer to
DLK-289, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK CLOSE SWITCH
Check close switch.
Refer to
DLK-291, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BACK DOOR CONTROL UNIT
1.
Replace back door control unit.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
DLK-395
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
ALL SWITCHES
ALL SWITCHES : Description
INFOID:0000000009649363
Automatic back door open/close function does not operate using all switches.
NOTE:
Automatic back door open/close operation condition is extremely complicated, during operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
ALL SWITCHES : Diagnosis Procedure
INFOID:0000000009649364
1.
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL MODULE
Check that DTC is not detected with automatic back door control module.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK BACK DOOR AUTO CLOSURE FUNCTION
Check back door auto closure function.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Refer to
DLK-398, "OPEN/CLOSURE FUNCTION : Diagnosis Procedure"
.
3.
CHECK GROUND CIRCUIT
Check automatic back door control module ground circuit.
Refer to
DLK-308, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK TOUCH SENSOR LH
Check touch sensor LH.
Refer to
DLK-299, "LH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK TOUCH SENSOR RH
Check touch sensor RH.
Refer to
DLK-301, "RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
1.
Replace automatic back door control module.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
AUTOMATIC BACK DOOR SWITCH
AUTOMATIC BACK DOOR SWITCH : Description
INFOID:0000000009649365
Automatic back door open/close function does not operate using automatic back door switch.
NOTE:
DLK-396
< SYMPTOM DIAGNOSIS >
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
Automatic back door open/close operation condition is extremely complicated, during operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
AUTOMATIC BACK DOOR SWITCH : Diagnosis Procedure
INFOID:0000000009649366
1.
CHECK AUTOMATIC BACK DOOR SWITCH
Check automatic back door switch.
Refer to
DLK-287, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
1.
Replace automatic back door control module.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
AUTOMATIC BACK DOOR CLOSE SWITCH
AUTOMATIC BACK DOOR CLOSE SWITCH : Description
INFOID:0000000009649367
Automatic back door open/close function does not operate using automatic back door close switch.
NOTE:
Automatic back door open/close operation condition is extremely complicated, during operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
AUTOMATIC BACK DOOR CLOSE SWITCH : Diagnosis Procedure
INFOID:0000000009649368
1.
CONFIRM THE OPERATION
1.
Turn ON automatic door main switch.
2.
Confirm the operation.
Is the result normal?
YES
>> Automatic back door system is normal.
NO
>> GO TO 2.
2.
CHECK AUTOMATIC BACK DOOR CLOSE SWITCH
Check automatic back door close switch.
Refer to
DLK-281, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK AUTOMATIC DOOR MAIN SWITCH
Check automatic door main switch.
Refer to
DLK-283, "AUTOMATIC BACK DOOR CONTROL MODULE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
1.
Replace automatic back door control module.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
INTELLIGENT KEY
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
DLK-397
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY : Description
INFOID:0000000009649369
Automatic back door open/close function does not operate using Intelligent Key.
NOTE:
Automatic back door open/close operation condition is extremely complicated, during operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
INTELLIGENT KEY : Diagnosis Procedure
INFOID:0000000009649370
1.
CHECK DTC WITH BCM AND AUTOMATIC BACK DOOR CONTROL MODULE
Check that DTC is not detected with BCM, TCM and combination meter.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Refer to
(BCM).
NO-2
>> Refer to
(automatic back door control module).
2.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent Key button?
YES
>> GO TO 3.
NO
>> Refer to
DLK-375, "Diagnosis Procedure"
3.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
1.
Replace automatic back door control module.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
BACK DOOR OPENER SWITCH
BACK DOOR OPENER SWITCH : Description
INFOID:0000000009649371
Automatic back door open/close function does not operate using back door opener switch.
NOTE:
Automatic back door open/close operation condition is extremely complicated, during operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
BACK DOOR OPENER SWITCH : Diagnosis Procedure
INFOID:0000000009649372
1.
CONFIRM THE OPERATION
1.
Turn ON automatic door main switch.
2.
Confirm the operation.
Is the result normal?
YES
>> Automatic door system is normal.
NO
>> GO TO 2.
2.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to
DLK-271, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK AUTOMATIC DOOR MAIN SWITCH
Check automatic door main switch.
Refer to
DLK-283, "AUTOMATIC BACK DOOR CONTROL MODULE : Component Function Check"
.
Is the inspection result normal?
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст