Nissan Quest E52. Manual — part 652
![](/vehicles/gon/llomit/zowi/ndoiery.png)
EXL-212
< PERIODIC MAINTENANCE >
[HALOGEN TYPE]
FRONT FOG LAMP AIMING ADJUSTMENT
Front fog lamp light distribution on the screen
JPLIA0008ZZ
A
: Cutoff line
B
: High illuminance area
H
: Horizontal center line of front fog lamp
V
: Vertical center line of front fog lamp
X
: Cutoff line height
![](/vehicles/gon/llomit/zowi/kut.png)
FRONT COMBINATION LAMP
EXL-213
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REMOVAL AND INSTALLATION
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000009653191
REMOVAL
DISASSEMBLY
1.
Front combination lamp
: N·m (kg-m, in-lb)
JMLIA2167GB
1. Front combination lamp housing
assembly
2. Front side marker lamp bulb
3. Front side marker lamp bulb socket
4. Halogen bulb (LO)
5. Halogen bulb (HI)
6. Front turn signal lamp/parking lamp
bulb socket
7. Bumper bracket
8. Front turn signal lamp/parking lamp
bulb
9. Back cover
JMLIA2169ZZ
EXL-214
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
FRONT COMBINATION LAMP
Removal and Installation
INFOID:0000000009653192
CAUTION:
Disconnect the battery negative terminal or the fuse.
REMOVAL
1.
Remove front bumper fascia. Refer to
EXT-12, "Removal and Installation"
.
2.
Remove front combination lamp mounting bolts.
3.
Pull out the front combination lamp forward the vehicle, and then disconnect the connector.
4.
Remove front combination lamp.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, perform aiming adjustment. Refer to
Replacement
INFOID:0000000009653193
CAUTION:
• Disconnect the battery negative terminal or the fuse.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
HEADLAMP BULB (HI)
1.
Disconnect the halogen bulb connector.
2.
Rotate the halogen bulb socket counterclockwise and unlock it.
3.
Remove halogen bulb socket from the front combination lamp housing assembly.
HEADLAMP BULB (LO)
1.
Disconnect the halogen bulb connector.
2.
Rotate the halogen bulb socket counterclockwise and unlock it.
3.
Remove halogen bulb socket from the front combination lamp housing assembly.
FRONT TURN SIGNAL LAMP/PARKING LAMP BULB
1.
Rotate the bulb socket counterclockwise and unlock it.
2.
Remove the bulb from the bulb socket.
FRONT SIDE MARKER LAMP BULB
1.
Rotate the bulb socket counterclockwise and unlock it.
2.
Remove the bulb from the bulb socket.
Disassembly and Assembly
INFOID:0000000009653194
DISASSEMBLY
1.
Rotate the halogen bulb (LO) socket counterclockwise and unlock it.
2.
Remove halogen bulb (LO) socket from the front combination lamp assembly.
3.
Rotate the halogen bulb (HI) socket counterclockwise and unlock it.
4.
Remove halogen bulb (HI) socket from the front combination lamp assembly.
5.
Rotate the front turn signal lamp/parking lamp bulb socket counterclockwise and unlock it.
6.
Remove front turn signal lamp/parking lamp bulb.
7.
Rotate the front side marker lamp bulb socket counterclockwise and unlock it.
8.
Remove the bulb from the front side marker lamp bulb socket.
ASSEMBLY
Note the following item, and then assemble in the reverse order of disassembly.
FRONT COMBINATION LAMP
EXL-215
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
CAUTION:
After installing the bulb, install the back cover and the bulb socket securely for watertightness.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст