Nissan Murano. Manual — part 1034
MWI-16
< SYSTEM DESCRIPTION >
METER SYSTEM
ENGINE COOLANT TEMPERATURE GAUGE : Component Description
INFOID:0000000009721235
FUEL GAUGE
FUEL GAUGE : System Diagram
INFOID:0000000009721236
FUEL GAUGE : System Description
INFOID:0000000009721237
CONTROL OUTLINE
The combination meter reads the fuel level sensor signal from the fuel level sensor unit and indicates the fuel
level to the fuel gauge.
REFUEL CONTROL
The combination meter accelerates the fuel gauge segment if the all conditions listed below are met, or the
ignition switch is ON from OFF.
• Ignition switch is ON position.
• The vehicle is not moving.
• The fuel level change by 15 (4 US gal, 3-1/4 lmp gal) or more.
A.
Lower right side of rear seat
B.
Engine room (RH)
C.
Engine front side
D.
Engine room (LH)
E.
Front bumper (left back)
F.
Engine room (LH)
G.
Engine room (LH)
H.
Behind the combination meter
I.
Lower left side of rear seat
Unit
Description
Combination meter
Indicates the engine coolant temperature to the engine coolant temperature gauge according to the
engine coolant temperature signal received from ECM via CAN communication.
ECM
Transmits the engine coolant temperature signal to the combination meter via CAN communication.
JSNIA0511GB
MWI
METER SYSTEM
MWI-17
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FUEL GAUGE : Component Parts Location
INFOID:0000000009721238
JPNIA0813ZZ
1.
Fuel level sensor unit (sub)
2.
ABS actuator and electric unit (con-
trol unit)
3.
Oil pressure switch
4.
TCM
5.
Ambient sensor
6.
ECM
7.
IPDM E/R
8.
BCM
9.
Combination meter
10.
Fuel level sensor unit and fuel pump
(main)
MWI-18
< SYSTEM DESCRIPTION >
METER SYSTEM
FUEL GAUGE : Component Description
INFOID:0000000009721239
ODO/TRIP METER
ODO/TRIP METER : System Diagram
INFOID:0000000009721240
ODO/TRIP METER : System Description
INFOID:0000000009721241
• The ABS actuator and electric unit (control unit) reads the rectangular wave signal provided by the wheel
sensor and transmits the vehicle speed signal to the combination meter via CAN communication.
• The combination meter converts the vehicle speed signal received via CAN communication to mileage, and
it displays the accumulated mileage to the odo/trip meter.
A.
Lower right side of rear seat
B.
Engine room (RH)
C.
Engine front side
D.
Engine room (LH)
E.
Front bumper (left back)
F.
Engine room (LH)
G.
Engine room (LH)
H.
Behind the combination meter
I.
Lower left side of rear seat
Unit
Description
Combination meter
Indicates the fuel gauge according to the fuel level sensor signal received from the fuel level sensor
unit.
Fuel level sensor unit
Refer to
.
JSNIA0293GB
MWI
METER SYSTEM
MWI-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ODO/TRIP METER : Component Parts Location
INFOID:0000000009721242
JPNIA0813ZZ
1.
Fuel level sensor unit (sub)
2.
ABS actuator and electric unit (con-
trol unit)
3.
Oil pressure switch
4.
TCM
5.
Ambient sensor
6.
ECM
7.
IPDM E/R
8.
BCM
9.
Combination meter
10.
Fuel level sensor unit and fuel pump
(main)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст