Nissan Murano. Manual — part 704
EXL-228
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN TYPE]
FRONT FOG LAMP CIRCUIT
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK FRONT FOG LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the front fog lamp harness connector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK FRONT FOG LAMP GROUND CIRCUIT OPEN CIRCUIT
Check continuity between the front fog lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front fog lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMPS
Connector
Terminal
RH
E345
86
Fog
Battery
voltage
Off
0 V
LH
87
Fog
Battery
voltage
Off
0 V
IPDM E/R
Front fog lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E345
86
E402
1
Existed
LH
87
E331
1
Front fog lamp
Ground
Continuity
Connector
Terminal
RH
E402
2
Existed
LH
E331
2
PARKING LAMP CIRCUIT
EXL-229
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
PARKING LAMP CIRCUIT
Component Function Check
INFOID:0000000009723032
1.
CHECK PARKING LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
.
2.
Check that the parking lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the parking lamp is turned ON.
Is the parking lamp turned ON?
YES
>> Parking lamp circuit is normal.
NO
>> Refer to
EXL-229, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000009723033
1.
CHECK PARKING LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK PARKING LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector and the front combination lamp connector.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if fusing is found again.)
3.
CHECK PARKING LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK PARKING LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
1.
Disconnect the front combination lamp connector.
2.
Turn the ignition switch ON.
3.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
TAIL
: Parking lamp ON
Off
: Parking lamp OFF
Unit
Location
Fuse No.
Capacity
Parking lamp
IPDM E/R
#52
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
RH
E346
91
Not existed
LH
92
EXL-230
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN TYPE]
PARKING LAMP CIRCUIT
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK PARKING LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the front combination lamp harness con-
nector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK PARKING LAMP GROUND OPEN CIRCUIT
Check continuity between the front combination lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front combination lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMPS
Connector
Terminal
RH
E346
91
TAIL
Battery
voltage
Off
0 V
LH
92
TAIL
Battery
voltage
Off
0 V
IPDM E/R
Front combination lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E346
91
E319
1
Existed
LH
92
E318
1
Front combination lamp
Ground
Continuity
Connector
Terminal
RH
E319
2
Existed
LH
E318
2
FRONT SIDE MARKER LAMP CIRCUIT
EXL-231
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
FRONT SIDE MARKER LAMP CIRCUIT
Component Function Check
INFOID:0000000009723034
NOTE:
Check the parking lamp circuit if the parking lamp and the front side marker lamp are not turned ON. Refer to
EXL-229, "Component Function Check"
1.
CHECK FRONT SIDE MARKER LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
.
2.
Check that the front side marker lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the front side marker lamp is turned ON.
Is the front side marker lamp turned ON?
YES
>> Front side marker lamp circuit is normal.
NO
>> Refer to
EXL-231, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000009723035
1.
CHECK FRONT SIDE MARKER LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK FRONT SIDE MARKER LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector and the front side marker lamp connector.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if fusing is found again.)
3.
CHECK FRONT SIDE MARKER LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK FRONT SIDE MARKER LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
1.
Disconnect the front side marker lamp connector.
TAIL
: Front side marker lamp ON
Off
: Front side marker lamp OFF
Unit
Location
Fuse No.
Capacity
Front side marker lamp
IPDM E/R
#52
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
RH
E346
91
Not existed
LH
92
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст