Nissan Murano. Manual — part 1279
SIDE CURTAIN AIR BAG MODULE
SR-21
< REMOVAL AND INSTALLATION >
[FOR USA AND CANADA]
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
3.
Remove the fixing bolts, and then remove the side curtain air bag module.
CAUTION:
• Never impact the side curtain air bag module.
• Replace the side curtain air bag module if it has been dropped
or sustained an impact.
• Never insert any foreign objects (screwdriver, etc.) into the side curtain air bag module.
• Never disassemble the side curtain air bag module.
• Never expose the side curtain air bag module to temperatures exceeding 90
°
C (194
°
F).
• Never allow oil, grease, detergent, or water to come in contact with the side curtain air bag module.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMHIA0009ZZ
SR-22
< REMOVAL AND INSTALLATION >
[FOR USA AND CANADA]
CRASH ZONE SENSOR
CRASH ZONE SENSOR
Exploded View
INFOID:0000000009720396
Removal and Installation
INFOID:0000000009720397
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
• Never use air tools or electric tools for servicing.
REMOVAL
1.
Remove the radiator cover grill RH. Refer to
.
2.
Remove the air duct (inlet). Refer to
3.
Remove the crash zone sensor fixing nuts.
4.
Disconnect the crash zone sensor harness connector, and then remove the crash zone sensor.
CAUTION:
• Never impact the crash zone sensor.
• Replace the crash zone sensor if it has been dropped or sus-
tained an impact.
• Replace the crash zone sensor of deployed SRS driver air bag and deployed SRS front passenger air
bag.
INSTALLATION
1.
Crash zone sensor
A
: Crash zone sensor harness connector
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMHIA0515GB
JMHIA0009ZZ
CRASH ZONE SENSOR
SR-23
< REMOVAL AND INSTALLATION >
[FOR USA AND CANADA]
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
Install in the reverse order of removal.
CAUTION:
• Never use the old fixing nuts after removal, replace with the new nuts.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
SR-24
< REMOVAL AND INSTALLATION >
[FOR USA AND CANADA]
SIDE AIR BAG (SATELLITE) SENSOR
SIDE AIR BAG (SATELLITE) SENSOR
Exploded View
INFOID:0000000009720398
Removal and Installation
INFOID:0000000009720399
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
• Never use the air tools or electric tools for servicing.
REMOVAL
1.
Remove the front seat belt. Refer to
SB-7, "SEAT BELT RETRACTOR : Removal and Installation"
2.
Remove the side air bag (satellite) sensor fixing nuts.
3.
Disconnect the side air bag (satellite) sensor harness connector, and then remove the side air bag (satel-
lite) sensor.
CAUTION:
• Never impact the side air bag (satellite) sensor.
• Replace the side air bag (satellite) sensor if it has been
dropped or sustained an impact.
• Replace the side air bag (satellite) sensor of deployed SRS front side air bag module and deployed
SRS side curtain air bag module.
1.
Side air bag (satellite) sensor
A
: Side air bag (satellite) sensor harness connector
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMHIA0516GB
JMHIA0009ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст