Nissan Murano. Manual — part 58
AV-10
Removal and Installation (Models without BSW
and LDW) . . . . . . . . . . . . . . . ..
Adjustment (Models without BSW and LDW) . .
STEERING ANGLE SENSOR . . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
ROOF ANTENNA . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
ANTENNA FEEDER . . . . . . . . . . .
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-11
< BASIC INSPECTION >
[BASE AUDIO WITHOUT COLOR DISPLAY]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000009721555
OVERALL SEQUENCE
DETAILED FLOW
1.
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the
incident/malfunction occurred).
>> GO TO 2
2.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify the relation between the symptom and the con-
dition when the symptom is detected.
>> GO TO 3
3.
DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the system.
ALNIA0182GB
AV-12
< BASIC INSPECTION >
[BASE AUDIO WITHOUT COLOR DISPLAY]
DIAGNOSIS AND REPAIR WORKFLOW
Is a malfunctioning part detected?
YES
>> GO TO 4
NO
>> GO TO 2
4.
REPAIR OR REPLACE THE MALFUNCTIONING PART
1.
Repair or replace the malfunctioning part.
2.
Reconnect parts or connectors disconnected during Diagnostic Procedure.
>> GO TO 5
5.
FINAL CHECK
Refer to confirmed symptom in step 2, and check that the symptom is not detected.
Has the symptom been repaired?
YES
>> INSPECTION END.
NO
>> GO TO 2
AV
AUDIO SYSTEM
AV-13
< SYSTEM DESCRIPTION >
[BASE AUDIO WITHOUT COLOR DISPLAY]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYSTEM DESCRIPTION
AUDIO SYSTEM
System Diagram
INFOID:0000000009721556
NOTE:
An antenna base integrated with radio antenna amp. is adopted.
System Description
INFOID:0000000009721557
AUDIO SYSTEM
The audio system consists of the following components.
• Audio unit
• Rod antenna (AM/FM main)
• Glass antenna (FM sub)
• Front door speakers
• Rear door speakers
• Front squawker
• Audio display unit
AM/FM Radio Mode
• AM/FM radio tuner is integrated into audio unit.
• When AM/FM radio waves are received by rod antenna, the radio waves are amplified by an antenna amp.
to input them to audio unit. Sound signals are output to each speaker for the audio unit. The FM sub antenna
is installed on the back door window glass and the audio unit is received.
CD Mode
• The audio unit has CD function.
• The audio unit outputs sound signals to each speaker when CD is inserted into the audio unit.
JSNIA3828GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст