Nissan Leaf. Manual — part 874
![](/vehicles/gon/gut/gevermery/eng.png)
LUGGAGE FLOOR TRIM
INT-41
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
2. Disengage and remove luggage side lower finisher.
INSTALLATION
Install in the reverse order of removal.
LUGGAGE FLOOR BOARD
LUGGAGE FLOOR BOARD : Removal and Installation
INFOID:0000000010119683
CAUTION:
Do not damage the body.
REMOVAL
1. Remove subwoofer (if equipped). Refer to
AV-500, "Removal and Installation"
2. Remove luggage floor board from back door opening portion.
INSTALLATION
Install in the reverse order of removal.
LUGGAGE REAR PLATE
LUGGAGE REAR PLATE : Removal and Installation
INFOID:0000000010119684
CAUTION:
• When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
REMOVE
1. Remove back door weather-strip. Refer to
DLK-185, "BACK DOOR WEATHER-STRIP : Removal and
.
2. Remove luggage floor board. Refer to
INT-41, "LUGGAGE FLOOR BOARD : Removal and Installation"
.
3. Remove luggage rear plate.
a. Disengage luggage rear plate fixing clips (A).
b. Disengage luggage rear plate fixing pawls and metal clips with a
suitable tool (A), and then remove luggage rear plate.
CAUTION:
Always remove the part while lifting it up toward vehicle
upper. Or otherwise, the parts that are stuck in luggage side
lower finisher may be damaged.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing, check in advance that pawls and metal clips are accurately aligned with the holes on
body side, and then install by pressing in.
LUGGAGE FLOOR UPPER FINISHER
JMJIA5146ZZ
: Pawl
: Metal clip
JMJIA5147ZZ
![](/vehicles/gon/gut/gevermery/fftod.png)
INT-42
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
LUGGAGE FLOOR UPPER FINISHER : Removal and Installation
INFOID:0000000010119685
CAUTION:
• When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
REMOVE
1. Remove rear parcel shelf finisher. Refer to
INT-40, "REAR PARCEL SHELF FINISHER : Removal and
.
2. Remove luggage floor board. Refer to
INT-41, "LUGGAGE FLOOR BOARD : Removal and Installation"
.
3. Remove luggage floor upper finisher.
a. Apply protective tape (A) on the parts to protect it from damage.
b. Remove luggage floor upper finisher fixing clips (A).
c.
Disengage luggage floor upper finisher fixing pawls with a suit-
able tool (B), and then remove luggage floor upper finisher.
CAUTION:
Always remove the part while lifting it up toward vehicle
upper. Or otherwise, the parts that are stuck in luggage side
lower finisher may be damaged.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing, check in advance that pawls are accurately aligned with the holes on body side, and
then install by pressing in.
LUGGAGE FINISHER MASK
LUGGAGE FINISHER MASK : Removal and Installation
INFOID:0000000010119686
CAUTION:
• When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
REMOVE
JMJIA6958ZZ
: Pawl
JMJIA6981ZZ
![](/vehicles/gon/gut/gevermery/thelepa.png)
LUGGAGE FLOOR TRIM
INT-43
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
1. Apply protective tape (A) on the parts to protect it from damage.
2. Disengage luggage finisher mask fixing pawls with a suitable
tool (A), and then remove luggage finisher mask.
INSTALLATION
Install in the reverse order of removal.
LUGGAGE FLOOR FRONT FINISHER
LUGGAGE FLOOR FRONT FINISHER : Removal and Installation
INFOID:0000000010119687
CAUTION:
• When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
REMOVE
1. Remove rear seat cushion. Refer to
SE-40, "SEAT CUSHION : Removal and Installation"
.
2. Remove rear seatback. Refer to
SE-37, "SEATBACK : Removal and Installation"
3. Remove luggage floor upper finisher. Refer to
INT-42, "LUGGAGE FLOOR UPPER FINISHER : Removal
4. Remove luggage floor front finisher.
a. Remove luggage floor front finisher fixing pawls (A) and screws
(B).
b. Pull up luggage floor front finisher, and then disengage luggage
floor front finisher fixing pawls, and then remove luggage floor
front finisher.
CAUTION:
Always remove the part while lifting it up toward vehicle
upper. Or otherwise, the parts that are stuck in luggage side
lower finisher may be damaged.
INSTALLATION
Install in the reverse order of removal.
LUGGAGE SIDE LOWER FINISHER
LUGGAGE SIDE LOWER FINISHER : Removal and Installation
INFOID:0000000010119688
CAUTION:
JMJIA6959ZZ
: Pawl
JMJIA6982ZZ
: Pawl
JMJIA5150ZZ
![](/vehicles/gon/gut/gevermery/you.png)
INT-44
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
Never damage the body.
REMOVAL
1. Remove rear body side welt. Refer to
INT-29, "BODY SIDE WELT : Removal and Installation"
2. Remove luggage rear plate. Refer to
INT-41, "LUGGAGE REAR PLATE : Removal and Installation"
3. Remove luggage floor front finisher. Refer to
INT-43, "LUGGAGE FLOOR FRONT FINISHER : Removal
4. Remove luggage hook.
Disengage luggage hook pin fixing pawl with a suitable tool (A),
and then remove luggage hook.
5. Remove luggage room lamp. Refer to
INL-56, "Removal and Installation"
6. Remove luggage side lower finisher.
a. Remove hook that is hooked to body panel.
b. Disengage luggage side lower finisher fixing clips and pawls
with a suitable tool (A), and then remove luggage side lower fin-
isher.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing, check in advance that clips and pawls are accurately aligned with the holes on body
side, and then install by pressing in.
Removal and installation of shock absorber mask
CAUTION:
When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
REMOVAL
: Pawl
JMJIA5151ZZ
JMJIA5265ZZ
: Clip
: Pawl
JMJIA5152ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст