Nissan Maxima. Manual — part 43
![](/vehicles/gon/gierestre/ntewame/nopa.png)
ADP-164
< SYMPTOM DIAGNOSIS >
ADP SYSTEM SYMPTOMS
SYMPTOM DIAGNOSIS
ADP SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000010051834
NOTE:
Always perform the “Basic Inspection” before performing diagnosis in the following table. Refer to
.
SYMPTOM 1
SYMPTOM 2
SYMPTOM 3
Symptom
Diagnosis procedure
Reference
page
Manual functions (for specific part) do
not operate
Sliding operation
Check sliding switch.
Reclining operation
Check reclining switch.
Lifting operation (front)
Check lifting switch (front).
Lifting operation (rear)
Check lifting switch (rear).
Tilt operation
Check tilt switch.
Telescopic sensor
Check telescopic switch.
Door mirror operation
1. Changeover switch.
2. Mirror switch
All parts of seat
Check power seat switch ground cir-
cuit.
Symptom
Diagnosis procedure
Reference
page
Memory functions (for specific part) do
not operate
Sliding operation
Check sliding sensor.
Reclining operation
Check reclining sensor.
Lifting operation (front)
Check lifting sensor (front).
Lifting operation (rear)
Check lifting sensor (rear).
Tilt operation
Check tilt sensor.
Telescopic operation
Check telescopic sensor.
Door mirror operation
Check door mirror sensor.
Driver side:
Passenger
side:
Symptom
Diagnosis procedure
Reference
page
Memory functions and manual func-
tions (for specific part) do not operate
Sliding operation
Check sliding motor.
Reclining operation
Check reclining motor.
Lifting operation (front)
Check lifting motor (front).
Lifting operation (rear)
Check lifting motor (rear).
Tilt operation
Check tilt motor.
Telescopic operation
Check telescopic motor.
Door mirror operation
Check door mirror motor.
![](/vehicles/gon/gierestre/ntewame/jantheg.png)
ADP SYSTEM SYMPTOMS
ADP-165
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SYMPTOM 4
SYMPTOM 5
Symptom
Diagnosis procedure
Reference
page
Entry/Exit assist function does not operate.
1. Check system setting.
2. Perform initialization.
Refer to Own-
er's Manual.
3. Check front door switch (driver side).
(Other automatic operations and Intelligent Key system
are normal)
1. Check door lock function.
2. Perform memory storing.
Symptom
Diagnosis procedure
Reference
page
Memory indicators 1 and/or 2 do not illuminate.
1. Check seat memory switch.
2. Check seat memory indicator.
![](/vehicles/gon/gierestre/ntewame/caut.png)
ADP-166
< SYMPTOM DIAGNOSIS >
NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
Description
INFOID:0000000010051835
The following symptoms are normal operations, and they do not indicate a malfunction.
Symptom
Cause
Action to take
Reference page
Entry/Exit assist function does
not operate.
No initialization has been performed.
Perform initialization.
Refer to Owner's Manu-
al.
Entry/exit assist function is disabled.
NOTE:
The entry/exit assist function is disabled
before delivery (initial setting).
Change the settings.
Entry assist function does not op-
erate.
Manual operation with power seat switch
was performed after exit assist function
execution.
Perform the memory
function.
Memory function, entry/exit as-
sist function or Intelligent Key in-
terlock function does not
operate.
The operating conditions are not fulfilled.
Fulfill the operation
conditions.
Memory function:
Exit assist function:
Entry assist function:
Intelligent Key interlock
function:
PRECAUTIONS
ADP-167
< PRECAUTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009466225
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution for Work
INFOID:0000000009735344
• When removing or disassembling each component, be careful not to damage or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
• When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the component
with a shop cloth or vinyl tape to protect it.
• Protect the removed parts with a shop cloth and prevent them from being dropped.
• Replace a deformed or damaged clip.
• If a part is specified as a non-reusable part, always replace it with a new one.
• Be sure to tighten bolts and nuts securely to the specified torque.
• After installation is complete, be sure to check that each part works properly.
• Follow the steps below to clean components:
- Water soluble dirt:
• Dip a soft cloth into lukewarm water, wring the water out of the cloth and wipe the dirty area.
• Then rub with a soft, dry cloth.
- Oily dirt:
• Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%) and wipe the dirty
area.
• Then dip a cloth into fresh water, wring the water out of the cloth and wipe the detergent off.
• Then rub with a soft, dry cloth.
- Do not use organic solvent such as thinner, benzene, alcohol or gasoline.
- For genuine leather seats, use a genuine leather seat cleaner.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст