Nissan Qashqai J11. Manual — part 2208
DAS-246
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C1B93-00 ENGINE/HEV SYSTEM
YES (“C1B93-00”)>>Replace the chassis control module. Refer to
DAS-312, "Removal and Installation"
YES (“U1000-00”)>>Refer to
DAS-286, "Diagnosis Procedure"
YES (other DTC)>>Check the DTC.
NO
>> INSPECTION END
![](/vehicles/gon/ffua/inoowhem/inyb.png)
DAS
C1B94-00 TRANSMISSION SYSTEM
DAS-247
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
C1B94-00 TRANSMISSION SYSTEM
DTC Description
INFOID:0000000010416989
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Transmission system
• TCM
• Chassis control module
FAIL-SAFE
The following functions are suspended.
• Active Ride Control (engine) function
• Active Trace Control function
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1.
Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2.
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC “C1B94-00” detected?
YES
>> Proceed to
DAS-247, "Diagnosis Procedure"
NO-1
>> To check malfunction symptom before repair: Refer to
GI-41, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010416990
1.
CHECK TRANSMISSION SYSTEM
With CONSULT
Perform self-diagnosis for “TRANSMISSION”.
Is DTC detected?
YES
>> Check the DTC. Refer to
(RE0F10D) or
NO
>> GO TO 2.
2.
PERFORM SELF-DIAGNOSIS
With CONSULT
1.
Erase self-diagnosis result for “CHASSIS CONTROL”.
2.
Turn the ignition switch OFF and wait for 10 seconds or more.
3.
Turn the ignition switch ON.
4.
Perform “All DTC Reading”.
Is DTC “C1B94-00”, “U1000-00” or other DTC detected?
YES (“C1B94-00”)>>Replace the chassis control module. Refer to
DAS-312, "Removal and Installation"
.
YES (“U1000-00”)>>Refer to
DAS-286, "Diagnosis Procedure"
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1B94-00
TM SYSTEM
(Transmission system)
When a malfunction is detected in transmission system.
DAS-248
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C1B94-00 TRANSMISSION SYSTEM
YES (other DTC)>>Check the DTC.
NO
>> INSPECTION END
![](/vehicles/gon/ffua/inoowhem/xxtcloncory.png)
DAS
C1B95-00 CONTROL MODULE
DAS-249
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
C1B95-00 CONTROL MODULE
DTC Description
INFOID:0000000010416991
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Chassis control module
FAIL-SAFE
The following functions are suspended.
• Active Trace Control function
• Active Ride Control (brake) function
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1.
Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2.
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC “C1B95-00” detected?
YES
>> Proceed to
DAS-249, "Diagnosis Procedure"
NO-1
>> To check malfunction symptom before repair: Refer to
GI-41, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010416992
1.
PERFORM SELF-DIAGNOSIS
With CONSULT
1.
Erase self-diagnosis result for “CHASSIS CONTROL”.
2.
Turn the ignition switch OFF and wait for 10 seconds or more.
3.
Turn the ignition switch ON.
4.
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC “C1B95-00” detected?
YES
>> Replace the chassis control module. Refer to
DAS-312, "Removal and Installation"
.
NO
>> INSPECTION END
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1B95-00
CONTROL MODULE
(Control module)
When a malfunction is detected in chassis control module.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст