Nissan Qashqai J11. Manual — part 657
![](/vehicles/gon/ffua/forullalerus/asorresero.png)
SHIFT FORK AND FORK ROD
TM-203
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F52A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SHIFT FORK AND FORK ROD
Exploded View
INFOID:0000000010288539
Disassembly
INFOID:0000000010288540
Remove return spring to striking rod assembly.
Assembly
INFOID:0000000010288541
1.
Temporarily install return spring to striking rod assembly.
CAUTION:
Be careful with the orientation of return spring.
2.
Attach one end of the return spring to striking interlock of striking
rod assembly while holding return spring.
CAUTION:
When installing, check that return spring is securely seated
in the groove of striking interlock of striking rod assembly.
PCIB1867E
PCIB1830E
PCIB1831E
PCIB1833E
![](/vehicles/gon/ffua/forullalerus/gou.png)
TM-204
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F52A]
SHIFT FORK AND FORK ROD
Inspection
INFOID:0000000010288542
STRIKING ROD ASSEMBLY AND RETURN SPRING
Check contact surfaces and sliding area for wear, damage, bending,
etc. If necessary, replace parts.
FORK ROD AND SHIFT FORK
• Check contact surfaces and sliding area for wear, damage, bend-
ing, etc. If necessary, replace parts.
JPDIC0145ZZ
PCIB1869E
![](/vehicles/gon/ffua/forullalerus/rig.png)
SHIFT FORK AND FORK ROD
TM-205
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F52A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
• Check if the width of shift fork hook (sliding area with coupling
sleeve) is within allowable specification below.
Item
One-side wear specification
Sliding width of new part
1st-2nd
0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
3rd-4th
0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
5th-6th
0.2 mm (0.008 in)
6.10 - 6.23 mm
(0.2402 - 0.2453 in)
Reverse
0.2 mm (0.008 in)
12.80 - 12.93 mm
(0.5039 - 0.5091 in)
SMT801D
![](/vehicles/gon/ffua/forullalerus/xtelel.png)
TM-206
< SERVICE DATA AND SPECIFICATIONS (SDS)
[6MT: RS6F52A]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
General Specifications
INFOID:0000000010288543
TRANSAXLE
Engine type
R9M
Transaxle model
RS6F52A
Axle type
4WD
Model code number
JA60A
Number of speed
6
Synchromesh type
Warner
Shift pattern
Gear ratio
1st
3.727
2nd
2.043
3rd
1.322
4th
0.947
5th
0.723
6th
0.596
Reverse
3.641
Number of teeth
Input gear
1st
11
2nd
20
3rd
31
4th
38
5th
47
6th
52
Reverse
11
Main gear
1st
41
2nd
39
3rd
41
4th
36
5th
34
6th
31
Reverse
39
Reverse idler gear
Front
37
Rear
39
Oil level “L”
mm (in)
87.0 - 92.0 (3.425 - 3.622)
Oil capacity (Reference)
(Imp pt)
2.0 (3-1/2)
PCIB1769E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст