Nissan Titan A60. Manual — part 1017
![](/vehicles/gon/bondowill/pold/jonellardkid.png)
WIPER AND WASHER SYSTEM SYMPTOMS
WW-47
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
SYMPTOM DIAGNOSIS
WIPER AND WASHER SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000006164551
CAUTION:
Perform the self-diagnosis with CONSULT-III before performing the diagnosis by symptom. Perform
the diagnosis by DTC if DTC is detected.
Symptom
Probable malfunction location
Inspection item
Front wiper does not
operate.
HI only
• Combination switch (wiper and washer swtich)
• Harness between combination switch (wiper
and washer swtich) and BCM
• BCM
Combination switch (wiper
and washer swtich)
Refer to
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper motor (HI) circuit
Refer to
.
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
"FR WIP REQ"
LO and INT
• Combination switch (wiper and washer swtich)
• Harness between combination switch (wiper
and washer swtich) and BCM
• BCM
Combination switch (wiper
and washer swtich)
Refer to
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper motor (LO) circuit
Refer to
.
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
"FR WIP REQ"
INT only
• Combination switch (wiper and washer swtich)
• Harness between combination switch (wiper
and washer swtich) and BCM
• BCM
Combination switch (wiper
and washer swtich)
Refer to
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
"FR WIP REQ"
HI, LO, and INT
SYMPTOM DIAGNOSIS
“FRONT WIPER DOES NOT OPERATE”
Refer to
.
![](/vehicles/gon/bondowill/pold/vembyom.png)
WW-48
< SYMPTOM DIAGNOSIS >
WIPER AND WASHER SYSTEM SYMPTOMS
Front wiper does not
stop.
HI only
• Combination switch (wiper and washer swtich)
• BCM
Combination switch (wiper
and washer swtich)
Refer to
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
"FR WIP REQ"
IPDM E/R
—
LO only
• Combination switch (wiper and washer swtich)
• BCM
Combination switch (wiper
and washer swtich)
Refer to
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
"FR WIP REQ"
IPDM E/R
—
INT only
• Combination switch (wiper and washer swtich)
• BCM
Combination switch (wiper
and washer swtich)
Refer to
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
"FR WIP REQ"
Front wiper does not
operate normally.
Intermittent adjustment
cannot be performed.
• Combination switch (wiper and washer swtich)
• Harness between combination switch (wiper
and washer swtich) and BCM
• BCM
Combination switch (wiper
and washer swtich)
Refer to
BCM
—
Intermittent control
linked with vehicle
speed cannot be per-
formed.
Check the vehicle speed detection wiper setting.
Refer to
BCS-21, "WIPER : CONSULT-III Function (BCM - WIPER)"
.
Wiper is not linked to
the washer operation.
• Combination switch (wiper and washer swtich)
• Harness between combination switch (wiper
and washer swtich) and BCM
• BCM
Combination switch (wiper
and washer swtich)
Refer to
BCM
—
Does not return to stop
position (Repeatedly
operates for 10 sec-
onds and then stops
for 20 seconds. After
that, it stops the opera-
tion).
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper auto stop signal
circuit
Refer to
.
Front washer does
not operate.
ON
Combination switch (wiper and washer swtich)
Combination switch (wiper
and washer swtich)
Refer to
• Harness between combination switch (wiper
and washer swtich) and front washer motor
• Front washer motor
Washer switch
Refer to
• Low washer fluid
• Obstructed or disconnected washer hose or
nozzle
—
Symptom
Probable malfunction location
Inspection item
NORMAL OPERATING CONDITION
WW-49
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
NORMAL OPERATING CONDITION
Description
INFOID:0000000006164552
FRONT WIPER MOTOR PROTECTION FUNCTION
• IPDM E/R may stop the front wiper to protect the front wiper motor if any obstruction (operation resistance)
such as a large amount of snow is detected during the front wiper operation.
• At that time turn OFF the front wiper and remove the foreign object. Then wait for approximately 20 seconds
or more and reactivate the front wiper. The wiper will operate normally.
![](/vehicles/gon/bondowill/pold/amer.png)
WW-50
< SYMPTOM DIAGNOSIS >
FRONT WIPER DOES NOT OPERATE
FRONT WIPER DOES NOT OPERATE
Description
INFOID:0000000006164553
The front wiper does not operate under any operation conditions.
Diagnosis Procedure
INFOID:0000000006164554
Regarding Wiring Diagram information, refer to
.
1.
CHECK WIPER RELAY OPERATION
IPDM E/R AUTO ACTIVE TEST
1. Start IPDM E/R auto active test. Refer to
PCS-11, "Diagnosis Description"
2. Check that the front wiper operates at the LO/HI operation.
CONSULT-III ACTIVE TEST
1. Select "FRONT WIPER" of IPDM E/R active test item.
2. While operating the test item, check front wiper operation.
Is front wiper operation normal?
YES
>> GO TO 5
NO
>> GO TO 2
2.
CHECK FRONT WIPER MOTOR FUSE
1. Turn the ignition switch OFF.
2. Check that the following fuse is not blown.
Is the fuse blown?
YES
>> Replace the fuse after repairing the affected circuit.
NO
>> GO TO 3
3.
CHECK FRONT WIPER MOTOR GROUND OPEN CIRCUIT
1. Disconnect front wiper motor.
2. Check continuity between front wiper motor harness connector
and ground.
Does continuity exist?
YES
>> GO TO 4
NO
>> Repair or replace harness.
4.
CHECK FRONT WIPER MOTOR OUTPUT VOLTAGE
CONSULT-III ACTIVE TEST
LO
: Front wiper LO operation
HI
: Front wiper HI operation
OFF
: Stop the front wiper.
Unit
Location
Fuse No.
Capacity
Front wiper motor
IPDM E/R
39
30 A
Front wiper motor
Ground
Continuity
Connector
Terminal
E23
1
Yes
WKIA2828E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст