Daewoo Musso. Manual — part 352
![](/vehicles/epme/qux/oho/xca.png)
DOORS 9P-3
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
FRONT DOOR
Removal & Installation Procedure
1. Remove the pin from the center hinge of the door.
2. Remove the upper/lower hinge bolts from the body and
remove the door assembly.
3. Installation should follow the removal procedure in the
reverse order.
![](/vehicles/epme/qux/oho/lis.png)
9P-4 DOORS
REAR DOOR
Removal & Installation Procedure
1. Remove the pin from the center hinge of the door.
2. Remove the upper/lower hinge bolts from the body and
remove the door assembly.
3. Installation should follow the removal procedure in the
reverse order.
![](/vehicles/epme/qux/oho/yselerondnqu.png)
DOORS 9P-5
TAIL GATE
Removal & Installation Procedure
1. Remove the shock absorber mounting bolts.
2. Disconnect the tailgate wiring harness.
3. Remove the tailgate by removing the tailgate bracket bolts.
4. Installation should follow the removal procedure in the
reverse order.
![](/vehicles/epme/qux/oho/nterd.png)
9P-6 DOORS
Adjustment Procedure
<Door Striker>
1. Adjust the striker in forward / rearward and left / right
directions. Adjust striker height by increasing / decreasing
the shims.
<Tailgate Striker>
2. Adjust the position of the striker as described above.
3. Adjust the position of the safety hook as described above.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст