Daewoo Musso. Manual — part 106
OM600 ENGINE MECHANICAL 1B3-131
11. The distance ‘x’ (camshaft basic bore - valve stem).
‘x’ = ‘z’ - ‘y’.
Determine the valve to use according to this measurement
(See ‘matching valves’)
Example)
Measured value ‘w’ = 38.2 mm
Measured value ‘z’ = 36.5 mm
Value
‘y’ = 15.5 mm
‘x’ = 36.5 - 15.5 = 21.0mm
In this case according to ‘Matching valves’ table, the
installed valve may be used.
![](/vehicles/epme/qux/oho/qunck.png)
1B3-132 OM600 ENGINE MECHANICAL
MACHINING OF VALVE SEAT
Preceding Work : Removal of prechamber
Removal and inspection of valve, replace if necessary
Inspection of valve guide, replace if necessary
1 Valve
2 Valve Seat Ring
3 Cylinder Head
4 Valve Guide
a Valve Seat Angle
b Valve Seat Free Angle
![](/vehicles/epme/qux/oho/lomismans.png)
OM600 ENGINE MECHANICAL 1B3-133
Service Data
Item
Valve Arrears ‘a’
Valve Seat Width ‘b’
Valve Seat Angle ‘
a
’
Valve Seat Free Angle ‘
b
’
Permissible Radial Runout
Valve Length ‘I’
Intake
0.1 - 0.7 mm
1.2 - 1.7 mm
45°
65°
0.03 mm
106.20 - 106.60 mm
105.30 - 105.70 mm
Exhaust
0.1 - 0.7 mm
1.5 - 2.0 mm
45°
65°
0.03 mm
106.20 - 106.60 mm
105.30 - 105.70 mm
Standard
Repair
w = 38.0 ± 0.2 mm
Matching Valves
Camshaft cam basic dia.
Size (x)
Size (x)
Size (x)
19.5 - 20.3mm
20.4 - 21.4mm
21.4 - 21.97mm
w = 37.6 ± 0.2 mm
Camshaft cam basic dia.
19.5 - 20.1mm
20.2 - 21.2mm
21.2 - 21.97mm
Valve to be used
Use machined valve,
if needed
use pair valve
1 = 105.5 ± 0.2mm
Reuse valve
Use standard size
valve
I = 106.4 ± 0.2mm
Commercial Tools
Hunger
D-8000 München 70
Type Ventilknecht K2000
Order No. 221 00 100
Hunger
D-8000 München 70
Type VDS 1A
Order No. 236 03 308
Hunger
D-8000 München 70
Order No. 217 93 601
Cylinder Head Clamping Devie
Valve Seat Turning Tool
Test Sat for Valves
![](/vehicles/epme/qux/oho/ofounieen.png)
1B3-134 OM600 ENGINE MECHANICAL
Machining Procedure
Valve machining is required :
- When the valve is leaking.
- When replacing the valve.
- When replacing the valve guide.
- When replacing the valve seat or valve seat ring.
1. Machine the valve seat (a=45°).
2. Measure valve seat width ‘b’.
Valve seat
width ‘b’
1.2 - 1.7 mm
1.5 - 2.0 mm
Intake
Exhaust
3. If the specification is exceeded, the valve seat width has to
be corrected at the lower free angle of ‘
b
’=65°.
4. Measure radial runout.
Runout
Max. 0.03mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст