Daewoo Korando. Manual — part 210
![](/vehicles/epme/havi/atorinofils/qued.png)
2D-4 REAR SUSPENSION
1 Spring Seat
2 Coil Spring
3 Lateral Rod
4 Shock Absorber
5 Upper Arm
6 Lower Arm
7 Connecting Link
8 Stabilizer Bar
COMPONENT LOCATOR
![](/vehicles/epme/havi/atorinofils/wou.png)
REAR SUSPENSION 2D-5
MAINTENANCE AND REPAIR
ON-VEHICLE SERIVCE
REAR SUSPENSION (5 - LINK)
1 Spring Seat
2 Coil Spring
3 Lateral Rod
4 Shock Absorber
5 Upper Arm
6 Lower Arm
7 Connecting Link
8 Stabilizer Bar
![](/vehicles/epme/havi/atorinofils/kerun.png)
2D-6 REAR SUSPENSION
Removal & Installation Procedure
l
Stabilizer bar
1. Remove the upper nut of the connecting link.
Installation Notice
2. Remove the stabilizer bar cap fixing bolts (arrow) and
remove the stabilizer bar.
Installation Notice
Tightening Torque
16 - 22 Nm
Distance Between the Nut
end and the Screw end
10 - 13 mm
Tightening Torque
30 - 45 Nm
l
Lateral Rod
1. Remove the lateral rod fixing nut from the frame.
Notice
Completely press the coil springs.
Installation Notice
2. Remove the lateral rod fixing nut from the rear axle and
remove the lateral rod.
Installation Notice
Tightening Torque
150 - 180 Nm
Tightening Torque
150 - 180 Nm
![](/vehicles/epme/havi/atorinofils/gly.png)
REAR SUSPENSION 2D-7
l
Shock Absorber.
1. Remove the lower mounting nut.
Installation Notice
2. Remove the upper mounting nut and remove the shock
absorber.
Installation Notice
Tightening Torque
50 - 65 Nm
l
Upper Arm
1. Remove the upper arm fixing nut from the frame.
Installation Notice
2. Remove the upper arm fixing nut from the rear axle and
remove the upper arm.
Installation Notice
Tightening Torque
150 - 180 Nm
Tightening Torque
150 - 180 Nm
l
Lower arm
1. Remove the parking brake cable bracket.
Tightening Torque
30 - 45 Nm
Distance between the nut
end and the screw end
6 - 9 mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст