Dacia Solenza (engine E7J). Manual — part 147
82
ACCOUSTIC WARNING - ANTI STARTING
82 - 45
Diagnostic – General
REPLACEMENT AND SETTING
New parts are not coded. Once mounted on vehicle, in order to become under operation,
the memorization of a code it is necessary.
In order to perform this procedure, it is absolutely necessary that some vehicle parts are
already coded (with the vehicle code).
Refer to the assignations table:
ATTENTION
:if a part is memorizing the code this one is assigned to this specific vehicle
and it is impossible that subsequently this code is erased or a second code is memorized. The
first time memorized code can not be anymore erased.
ASSIGNATION TABLE
〈
The key assigned to a vehicle must be new and already programmed on that vehicle.
REMARK :
this may be programmed n vehicle but it is not effective (not assigned)
.
ATTENTION :
only the keys presented when performing this operation are to be under
operation.
AFTER
SALE
INTERVENTION
ELEMENTS CONDITION
REPARATION
CODE
NECESSITY
Cockpit Central
Unit
Ke y
Injection
computer
Cockpit Central Unit
programming
Key’ assignation or
deletion
Injection computer
programming
new
coded
coded
coded
new*
coded
coded
-
new
YES
YES
N O
82
ACCOUSTIC WARNING - ANTI STARTING
82 - 46
Cockpit central Unit is not coded. Once mounted on vehicle, in order to become under
operation, the memorization of a code it is necessary.
In order to perform this procedure, it is obligatory to have at least one of the vehicle old keys,
to know the reparation code and the injection computer must be correctly coded (please refer
to the assignation table).
isvehicle, in order to become under operation, the memorization of a
code it is necessary.
I
ATTENTION: if Cockpit Central Unit is memorizing a code, this one is assigned only to
that vehicle. It is impossible the code erasing or memorizing another code.
eh old keys, to knhe
re
IMPORTANT: only the keys presented when performing this procedure are becoming
under operation, with the condition:
- they have been already coded on this vehicle.
- they are new (not coded).
icn computer must be correctly coded (please refer to tho
REMARK: if only Cockpit Central Unit is to be replaced, it is not necessary to perform
any intervention to the injection computer: this one will keep the same anti starting code.
SPECIAL SITUATIONS
If the screen displays:
“ Inserted after-sale code does not cor-
respond to the presented key. Check if the
code was correctly entered and if a vehicle
key was presented”: the code is not corre-
sponding to the vehicle or a new key has been
used.
“Cockpit Central Unit is not empty. Start
the keys programming procedure”. Cock-
pit Central Unit is already coded on this ve-
hicle.
“Cockpit Central unit programming fail-
ure, key not possible to be used on this
vehicle”; the key code does not correspond
to the entered code (the key is belonging to a
vehicle of another type).
Diagnostic – General
PROGRAMMING PROCEDURE OF
THE COCKPIT CENTRAL UNIT
By means of the CLIP tester:
Enter in dialogue with system “Anti-start-
ing”.
In menu “Control module”, “Spec ific
control”, validate line “SC027: Cockpit
Central Unit programming”
The tester is displaying “ Take off the key
from anti-theft contact”
The tester is displaying “Introduce the
after-sale code”. With the contact off, insert
the after-sale secret code (12 hexadecimal
characters), the validate it.
If the code format is correct, the tester is
displaying “Insert an already coded key on
the vehicle, set the contact on and then
validate” and the programming procedure is
under way.
The tester is displaying “ UCH pro-
grammed. Start the keys programming
procedure” and the Cockpit Central Unit is
coded. In this moment, it is necessary to enter
in the key programming mode, in order assign
the others keys (maximum four). More sec-
onds may pass before this message is displayed.
ATTENTION: the maximum interval between
each operation is of 5 minute s if not the
procedure is canceled.
82
ACCOUSTIC WARNING - ANTI STARTING
82 - 47
THE PROCEDURE OF COCKPIT CENTRAL UNIT PROGRAMMING
Diagnostic – General
The code can be entered only when
contact is et off
Enter in dialogue with system “Anti-starting”
Select menu “Control menu” and “Specific
control”.
Select control “SC027 Cockpit Central
Unit Programming”.
Tester is displaying:
“Take off the key from anti-theft contact”
Tester is displaying:
“Enter the after-sale code”
Enter the code (12 hexadecimal
characters, capital letters)
Tester is displaying:
“Insert an already programmed key on
vehicle”
Insert a key belonging to the vehicle and set
the contact on.
The procedure can not be performed with a
new key.
A
If tester is displaying:
“Cockpit Central Unit is no
empty.
Start the key programming
procedure”.
Cockpit Central Unit is already
coded on this vehicle
82
ACCOUSTIC WARNING - ANTI STARTING
82 - 48
Diagnostic – General
A
If tester is displaying:
“The after-sale code does
not correspond to the pre-
sented key. Check if the
code was correctly en-
tered and if a vehicle key
was presented
”.
If tester is displaying:
“UCH programming fail-
ure. Key not in use on
this vehicle”.
The entered code does not
correspond to the vehicle’s key,
the key does not belong to that
vehicle or it is new.
The key code does not
correspond with the entered code
(the key belongs to other vehicle).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст