Citroen C-Elysee (2017 year). Instruction — part 14
04
VOL+
VOL-
207
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
Auxiliary socket (AUX)
Auxiliary JACK socket
Do not connect a device to the USB port and to the auxiliary Jack
socket at the same time.
The auxiliary Jack socket permits the connection of a
portable non-mass storage device or an Apple
®
player if
not recognised by the USB port.
Connect the portable device to the auxiliary Jack socket using a
suitable cable (not supplied).
Press the
SRC/TEL button several times
in succession and select "
AUX".
First adjust the volume on your portable device.
Then adjust the volume of the audio
system.
The display and management of controls is on the
portable device.
04
208
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
Streaming - Playing audio files via
Bluetooth
Depending on the compatibility of the phone
Pair/connect the telephone: see the "USING THE
TELEPHONE" section.
Streaming allows music files on a telephone to be heard via the
vehicle's speakers.
The telephone must support the appropriate bluetooth profiles
(Profiles A2DP / AVRCP).
Activate the streaming source by pressing
SRC/TEL.
Control of playback is via the audio system. The
contextual information can be displayed in the screen.
In certain cases, playing of the audio files must be initiated from
the telephone.
The audio quality depends on the quality of the transmission from
the telephone.
Play mode
The play modes available are:
- Normal: the tracks are played in order, depending on the
classification of the selected files.
- Random: the tracks in an album or folder are played in a random
order.
- Random all: all of the tracks saved in the media are played in
random order.
- Repeat: the tracks played are only those from the current album
or folder.
Press the control knob for access to
the contextual menu.
or
Press MENU
.
Select "
Multimedia" and confirm.
Select "
Media parameters" and
confirm.
Select "
Playback mode" and confirm.
Select the desired play mode then
press the control knob to confirm and
save the modifications.
05
209
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
Pairing a telephone
First connection
The services offered depend on the network, the SIM card and the compatibility of the Bluetooth telephone used.
Consult your telephone's manual and your operator to find out which services are available to you.
Activate the telephone's Bluetooth function and
ensure that it is "visible to all" (refer to the telephone
user guide).
Press MENU
.
A window is displayed "
Search in progress…".
Select the telephone to be connected
from the list. Only one telephone can
be connected at a time.
Select "
Search for a device".
For safety reasons and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth mobile
telephone with the Bluetooth hands-free system of your audio system must be carried out with the
vehicle stationary and the ignition on.
Visit www.citroen.co.uk for more information (compatibility, additional help, ...).
Select "
Bluetooth connection" and
confirm.
05
210
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
A virtual keypad is displayed on the
screen: enter a code of at least 4 digits
then press the control knob to confirm.
A message is displayed on the screen of the
telephone: enter the same code and confirm.
A message appears in the screen to confirm the result of the
connection.
Pairing can also be initiated from the telephone by searching for
detected Bluetooth devices.
Accept the connection to the telephone.
If pairing fails, try again; the number of attempts is not limited.
The directory and the calls list can be accessed after the
synchronisation period (if the telephone is compatible).
Automatic connection must be configured in the telephone to allow
the connection each time the vehicle is started.
In some cases, the reference number of the telephone or the
Bluetooth address may appear instead of the name of the telephone.
Pair/connect the telephone then listen: see the AUDIO section.
Streaming - Playing audio files via
Bluetooth
05
211
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
To see the telephone status,
press MENU
.
Select "Telephone
" and confirm.
Select "
Telephone management"
and confirm.
Select "
Telephone status" and confirm.
Telephone status
The screen displays: the name of the telephone, the name of the
network, network signal strength, confirmation of the Bluetooth
connection and the streaming connection.
05
212
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
The telephone connection automatically includes hands free operation
and audio streaming.
The ability of the system to connect to just one profile depends on the
telephone. Both profiles may connect by default.
Press MENU
.
Select "
Bluetooth connection" and
confirm.
Indicates connection of the audio steaming profile.
Managing connections
Select "
Connections management"
and confirm. The list of paired
telephones is displayed.
Select a telephone and confirm.
Indicates connection of the hands-free profile.
Then select and confirm:
- "
Connect telephone" / "Disconnect
telephone": to connect / disconnect
the telephone or the hands-free
connection only.
- "
Connect media player" /
"
Disconnect media player": to
connect / disconnect only streaming.
- "
Connect telephone + media
player
" / "
Disconnect telephone +
media player
": to connect /
disconnect the telephone (hands-free
and streaming).
- "
Delete connection": to delete the
pairing.
Indicates that a device is connected.
05
213
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
To display the "
TELEPHONE" menu:
- Make along press on
SRC/TEL.
- Or, press the control knob to
display the contextual menu. Select
"
Call" and confirm.
- Or, press MENU, select
"Telephone
" and confirm. Select
"
Call" and confirm.
Select "Dial
" to enter a number and
confirm.
To display the "
TELEPHONE" menu:
- Make a long press on
SRC/TEL.
- Or, press the dial to display the
contextual menu. Select "
Call" and
confirm.
- Or, press MENU, select
"Telephone
" and confirm. Select
"
Call" and confirm.
Press the control knob to confirm to
start the call.
Select "
Calls list" and confirm.
Making a call - Dialling
Select numbers one at a time using
the 7
and 8 buttons and confirm.
Making a call - Recently called numbers*
Select the number and confirm to start
the call.
The calls list includes calls sent and received in the vehicle using the
connected telephone.
* Depending on the compatibility of the telephone.
Correction allows numbers to be deleted one at a time.
It is possible to make a call directly from the telephone; park the
vehicle first as a safety measure.
05
BACK
214
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
To display the "
TELEPHONE" menu:
- Make a long press on
SRC/TEL.
- Or, press the dial to display the
contextual menu. Select "
Call" and
confirm.
- Or, press MENU, select
"Telephone
" and confirm. Select
"
Call" and confirm.
Select "
Directory" and confirm.
An incoming call is announced by a ring and a superimposed display
in the multifunction screen.
Mobile
(depending on the information
available in the contact records of
the telephone connected).
"YES
" to accept the call is selected by
default.
Press the control knob to accept the
call.
Select "NO
" and confirm to reject the
call.
Making a call - From the directory of contacts
Select a contact then confirm.
Receiving a call
Select the number and confirm.
A long press on
BACK or on SCR/TEL
also rejects an incoming call.
Business
Home
or
Press one of these buttons to accept
the call.
05
215
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
During a call, press the control knob to
display the contextual menu.
Hang up
In the contextual menu:
- select "
Micro OFF" to switch off the
microphone.
- deselect "
Micro OFF" to switch the
microphone on.
Managing calls
A long press on one of these buttons
also ends the call.
In the contextual menu, select "
Hang up"
to end the call.
Secret - Mute
(so that the caller cannot hear)
05
216
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
From the contextual menu, select
"
DTMF tones" and confirm to use
the digital keypad to navigate in the
interactive voice response menu.
From the contextual menu, select
"
Switch" and confirm to return to a call
left on hold.
Interactive voice response
Call on hold
In the contextual menu:
- select "Telephone mode" to
transfer the call to the telephone.
- deselect "Telephone mode" to
transfer the call to the vehicle.
In certain cases, the combined mode has to activated from the
telephone.
If the contact has been cut off, when you reconnect on returning to
the vehicle, the Bluetooth connection will be restored automatically
(depending on the compatibility of the telephone).
Combined mode
(to leave the vehicle without ending the call)
05
217
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
USING THE TELEPHONE
Directory
The telephone directory is sent to the system, depending on the
compatibility of the telephone.
The directory is temporary and depends on the Bluetooth
connection.
Contacts imported from the telephone to the audio system directory
are saved in a permanent directory visible to all, whatever the
telephone connected.
To modify the contacts saved in the
system, press MENU then select
"Telephone
" and confirm.
Select "
Directory management" and
confirm.
You can:
- "
Consult an entry",
- "
Delete an entry",
- "
Delete all entries".
Select "
Directory" to see the list of
contacts.
For access to the directory make a long
press on
SRC/TEL
or
Press the control knob then select
"
Call" and confirm.
06
218
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
Press ¯
to display the audio
settings menu.
The settings available are:
- Ambience,
- Bass,
- Treble,
- Loudness,
- Distribution: Personalised or Driver,
- Left / right balance,
- Fader (front / rear balance),
- Auto. volume.
Screen C
The distribution (or spatialisation using the Arkamys
©
system), is
an audio process which allows the sound quality to be improved
according to the setting chosen, corresponding to the position of
the listeners in the vehicle.
AUDIO SETTINGS
Select and confirm "
Other settings…"
to display the next setting in the list.
The Ambience, Treble and Bass audio settings are different and
independent for each sound source.
On-board audio: Arkamys
©
Sound Staging.
With Sound Staging, the driver and passengers are immersed in an
"audio scene" recreating the natural atmosphere of an auditorium:
truly a part of the scene and its surroundings.
This new sensation is made possible by software in the audio
system which processes the digital signals from the media players
(radio, CD, MP3…) without changing the audio settings. This
processing takes account of the characteristics of the passenger
compartment to produce optimum results.
The Arkamys
©
software installed in your audio system processes
the digital signal from the media players (radio, CD, MP3, ...) and
recreates a natural musical scene, with harmonious placement of
instruments and voices in the space in front of passengers, level
with the windscreen.
07
219
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
SCREEN MENU MAP(S)
SCREEN C
MEDIA
Media parameters
Choice of playback mode
Choice of track listing
TELEPHONE
Call
Dial
Directory
Calls list
Voice mail box
Directory management
Consult an entry
Delete an entry
Delete all entries
Telephone management
Telephone status
Hang up
BLUETOOTH CONNECTION
Normal
Random
Random all
Repeat
By folders
By artists
By genres
By playlists
Radio parameters
1
2
2
1
2
2
2
2
1
2
2
2
1
2
1
1
1
3
3
3
3
3
3
3
3
1
Connections management
Search for a device
MAIN FUNCTION
Option A1
Option A11
Option A
Option B...
1
2
3
1
07
220
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
SCREEN MENU MAP(S)
PERSONALISATION -
CONFIGURATION
Define the vehicle parameters
Driving assistance
Parking assistance
Vehicle lighting
Daytime lights
Interior lighting
Follow-me-home headlamps
Choice of language
Display configuration
Choice of units
Date and time adjustment
Display parameters
Brightness
1
2
3
2
3
2
3
1
1
2
2
2
2
221
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
FREqUENTLY ASKED qUESTIONS
The following tables contain answers to the most frequently asked questions.
qUESTION
ANSWER
SOLUTION
There is a difference in
sound quality between
the different audio
sources (radio, CD...).
For optimum sound quality, the audio settings (Volume, Bass, Treble,
Ambience, Loudness) can be adapted to the different sound sources,
which may result in audible differences when changing source (radio,
CD...).
Check that the audio settings (Volume, Bass,
Treble, Ambience, Loudness) are adapted to
the sources listened to. It is advisable to set
the AUDIO functions (Bass, Treble, Front-Rear
Fader, Left-Right Balance) to the middle position,
select the musical ambience "None" and set the
loudness correction to the "Active" position in CD
mode or to the "Inactive" position in radio mode.
When changing the
settings for treble and
bass, the ambience
setting is deselected.
When changing the
ambience setting, treble
and bass are reset
to zero.
Choosing an ambience imposes settings for treble and bass. Modifying
one without the other is not possible.
Modify the treble and bass settings or the
ambience setting to obtain the desired sound
quality.
When changing the
balance setting,
distribution is deselected.
Choosing a distribution setting imposes a balance setting. Modifying one
without the other is not possible.
Modify the balance setting or the distribution
setting to obtain the desired sound quality.
222
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
FREqUENTLY ASKED qUESTIONS
qUESTION
ANSWER
SOLUTION
The quality of reception
of the radio station
listened to gradually
deteriorates or the stored
stations do not function
(no sound, 87.5 MHz is
displayed...).
The vehicle is too far from the transmitter used by the station listened
to or there is no transmitter in the geographical area through which the
vehicle is travelling.
Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.
The environment (hills, buildings, tunnels, basement car parks...) block
reception, including in RDS mode.
This phenomenon is normal and does not indicate
a failure of the audio equipment.
The aerial is absent or has been damaged (for example when going
through an automatic car wash or in an underground car park).
Have the aerial checked by a CITROËN dealer.
Sound cut-outs of 1 to
2 seconds in radio mode.
During this brief sound cut-out, the RDS searches for another frequency
giving better reception of the station.
Deactivate the RDS function if the phenomenon is
too frequent and always on the same route.
The traffic announcement
(TA) is displayed. I do
not receive any traffic
information.
The radio station does not broadcast traffic information.
Tune to a radio station which broadcasts traffic
information.
The stored stations are
not found (no sound,
87.5 MHz is displayed...).
An incorrect waveband is selected.
Press the BAND button to return to the waveband
on which the stations are stored.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст