Chery Tiggo 5 (T21). Service manual — part 374
33–
16
33
Center Seat Belt Assembly
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the center seat belt outer trim cover.
a. Using a screwdriver wrapped with protective tape, pry
the clip on the center seat belt outer trim cover, and
remove the center seat belt outer trim cover.
4. Remove the roof assembly (
).
HINT:
It is unnecessary to completely remove the roof assembly, but it is necessary to lower the rear part of roof
assembly, so that the center seat belt assembly can be removed.
5. Remove the center seat belt inner trim cover.
a. Remove 2 fixing screws (arrow) from the center seat
belt inner trim cover.
(Tightening torque: 3 ± 0.5 N·m)
CAUTION
Make sure to wear safety equipment to prevent accidents when removing center seat belt assembly.
Appropriate force should be applied when removing center seat belt assembly, and avoid operating
roughly.
DO NOT scratch the interior when removing center seat belt assembly.
RT21490311
RT21330150
33–
17
33
b. Using a screwdriver wrapped with protective tape, pry
the clip on the center seat belt inner trim cover.
c. Remove the center seat belt inner trim cover.
6. Remove the center seat belt assembly.
a. Remove 2 fixing bolts (arrow) from the center seat belt
assembly.
(Tightening torque: 50 ± 5 N·m)
b. Remove the center seat belt assembly.
Inspection
Check the center seat belt retractor.
HINT:
When the inclination of center seat belt retractor is 15° or
less, check that the center seat belt can be pulled out from
center seat belt retractor. When the inclination of center seat
belt retractor is over 45°, check that center seat belt locks.
If result is not as specified, replace the center seat belt
assembly.
RT21330140
RT21330160
CAUTION
DO NOT disassemble the center seat belt retractor.
RT21330170
Unlock
lock
45
o
Retractor
33–
18
33
Installation
Installation is in the reverse order of removal.
CAUTION
Keep seat belt assembly clean, avoid attaching oil and check seat belt assembly for damage when
installing the center seat belt assembly.
Make sure to tighten all fixing bolts according to the specified torque when installing the center seat belt
assembly.
33–
19
33
Rear Seat Belt Buckle Assembly
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the rear seat assembly (
4. Remove the rear left seat belt buckle assembly.
a. Remove the fixing bolt (arrow) from the rear left seat
belt buckle assembly.
(Tightening torque: 50 ± 5 N·m)
b. Pull out and remove the rear left seat belt buckle
assembly from the rear left seat assembly.
5. Remove the rear center seat belt buckle assembly.
a. Remove the fixing bolt (arrow) from the rear center
seat belt buckle assembly.
(Tightening torque: 50 ± 5 N·m)
b. Pull out and remove the rear center seat belt buckle
assembly from the rear left seat assembly.
6. Remove the rear right seat belt buckle assembly.
a. Remove the fixing bolt (arrow) from the rear right seat
belt buckle assembly.
(Tightening torque: 50 ± 5 N·m)
b. Pull out and remove the rear right seat belt buckle
assembly from the rear right seat assembly.
CAUTION
Make sure to wear safety equipment to prevent accidents when removing the rear seat belt buckle
assembly.
DO NOT scratch the interior when removing the rear seat belt buckle assembly.
RT21330190
RT21330180
RT21330200
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст