Chery Tiggo 5 (T21). Service manual — part 245
21–
5
21
Tools
Special Tools
General Tools
Bearing Remover
Punch
RCH0000011
RCH0000015
Hydraulic Press
Dial Indicator and Magnetic Holder
RCH0000012
RCH0000023
0
10
20
30
40
50
60
70
80
90
21–
6
21
DIAGNOSIS & TESTING
Differential Gear Clearance Inspection
Inspection Method
1. Remove the differential.
2. Check the clearance of differential drive shaft gear (2)
with the dial indicator (1).
Gear clearance: 0.025 - 0.150 mm
2
1
RT21210020
CAUTION
If the clearance is not as specified, replace and adjust the drive shaft gear washer.
After replacing the drive shaft gear washer, measure and adjust the clearance again to ensure that it is
as specified.
21–
7
21
ON-VEHICLE SERVICE
Driven Gear of Final Drive
Removal
1. Remove the differential (
2. Hold the differential in a vise.
3. Remove the final drive driven gear bolts.
(Tightening torque: 111 - 118 N·m)
Installation
Installation is in the reverse order of removal.
RT21210030
CAUTION
Apply seal gum to the bolts during installation.
21–
8
21
Differential Bearing
Removal
1. Remove the differential (
2. Remove the differential bearing.
a. Using a hydraulic press (1), separate the bearing (2)
from the differential.
Installation
1. Install the differential bearing (1).
1
2
RT21210040
1
RT21210050
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст