Chery Tiggo 5 (T21). Service manual — part 512
48–
6
48
Bumper assembly and bumper crossmember assembly are safety devices to protect the front and rear body,
which mainly absorb and reduce outside shock. The exterior mainly includes front bumper assembly, radiator
grille assembly, front bumper stiffener bracket assembly, front bumper mounting bracket assembly, front
bumper crossmember assembly, wheel flare assembly, apron plate assembly, front wheel house protector
assembly, fender assembly, engine lower protector assembly, rear bumper assembly, rear bumper mounting
bracket assembly, rear bumper crossmember assembly, front wheel house protector assembly of rear wheel,
rear wheel house protector assembly, front windshield lower garnish assembly, roof rack assembly, rear
spoiler assembly and back door upper trim board assembly.
Specifications
Torque Specifications
Description
Torque (N·m)
Front Name Plate CAC Assembly Fixing Screw
2.5 ± 0.5
Front Bumper Upper Grille Fixing Screw
2.5 ± 0.5
Front Bumper Assembly Fixing Screw
3 ± 1
Front Bumper Assembly Fixing Bolt
10 ± 1
Front Fog Assembly Fixing Screw
1.5 ± 0.5
Front Bumper Mounting Bracket Assembly Fixing
Bolt
10 ± 1
Headlight Fixing Bolt
3.5 ± 0.5
Front Bumper Upper Mounting Bracket Assembly
Fixing Bolt
10 ± 1
Front Bumper Lower Mounting Bracket Assembly
Fixing Bolt
10 ± 1
Front Bumper Crossmember Assembly Fixing Nut
23 ± 2
Apron Plate Cover Assembly Fixing Screw
3 ± 1
Apron Plate Assembly Fixing Screw
3 ± 1
Front Bumper Center Stiffener Bracket Assembly
Fixing Bolt
10 ± 1
Front Bumper Lower Stiffener Bracket Assembly
Fixing Nut
10 ± 1
Front Wheel House Protector Assembly Fixing
Screw
3 ± 1
Fender Assembly Fixing Bolt
10 ± 1
Engine Lower Protector Assembly Fixing Bolt
10 ± 1
Engine Lower Protector Assembly Fixing Screw
3 ± 1
Rear Bumper Assembly Fixing Screw
3 ± 1
Rear Bumper Assembly Fixing Bolt
3 ± 1
Rear Bumper Mounting Bracket Assembly Fixing
Screw
3 ± 1
Rear Bumper Crossmember Assembly Fixing Bolt
23 ± 2
Front Wheel House Protector Assembly of Rear
Wheel Fixing Screw
3 ± 1
48–
7
48
Tool
General Tool
Rear Wheel House Protector Assembly Fixing Screw
3 ± 1
Front Windshield Lower Garnish Assembly Fixing
Screw
3 ± 1
Roof Rack Assembly Fixing Bolt
9 ± 1
Rear Spoiler Assembly Fixing Nut
5 ± 1
High Mounted Stop Light Fixing Nut
3.5 ± 0.5
Back Door Locating Seat Fixing Bolt
1.5 ± 1
Rear Bumper Energy Absorber Fixing Bolt
23 ± 2
Rear Fog Light Fixing Screw
1.5 ± 0.5
Back Door Upper Trim Board Assembly Fixing Screw
3 ± 1
Back Door Upper Trim Board Assembly Fixing Nut
5 ± 1
Camera Fixing Screw
6 ± 0.5
Description
Torque (N·m)
Interior Crow Plate
RCH0000025
48–
8
48
ON-VEHICLE SERVICE
Radiator Grille Assembly
Removal
1. Remove the radiator grille assembly.
a. Remove 6 plastic clips (arrow) from the radiator grille
assembly.
b. Using a screwdriver wrapped with protective tape, pry
up the claw on radiator grille assembly.
c. Remove the radiator grille assembly.
2. Remove the front name plate CAC assembly.
a. Remove 6 fixing crews (arrow) from the front name
plate CAC assembly.
(Tightening torque: 3 ± 1 N·m)
b. Remove the front name plate CAC assembly from the
radiator grille assembly.
CAUTION
Be sure to wear safety equipment to prevent accidents when removing radiator grille assembly.
Appropriate force should be applied when removing radiator grille assembly, and operate carefully.
Try to prevent body paint surface from being scratched when removing radiator grille assembly.
RT21480030
RT21480040
RT21480042
48–
9
48
3. Remove the front bumper upper grille.
a. Remove 14 fixing screws (arrow) from the front
bumper upper grille.
(Tightening torque: 3 ± 1 N·m)
b. Remove the front bumper upper grille from the
radiator grille assembly.
Installation
Installation is in the reverse order of removal.
RT21480043
CAUTION
Be sure to wear safety equipment to prevent accidents when installing radiator grille assembly.
Try to prevent body paint surface from being scratched when installing radiator grille assembly.
Make sure that radiator grille is installed correctly and fitting clearance between radiator grille and front
bumper is appropriate when installing radiator grille assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст