Chery Tiggo 5 (T21). Service manual — part 310
28–
22
28
12.Remove the coupling bolt (arrow) between steering
column with intermediate shaft assembly and steering
gear input shaft.
(Tightening torque: 60 ± 5 N·m)
13.Remove the steering column with intermediate shaft assembly.
a. Disconnect 2 connectors (arrow) from the electronic
controller.
b. Remove 2 fixing nuts (arrow) from the upper bracket
of steering column assembly, and then remove the
upper part of steering column.
(Tightening torque: 25 ± 3 N·m)
c. Remove 2 fixing bolts (arrow) from the lower bracket
of steering column assembly.
(Tightening torque: 25 ± 3 N·m)
d. Carefully remove the steering column with intermediate shaft assembly from underneath.
RT21280240
RT21280250
RT21280260
10
15
25
25
RT21280270
CAUTION
DO NOT touch the interior ornament when removing the steering column with intermediate shaft
assembly to avoid scratching the interior ornament.
28–
23
28
Disassembly
1. Remove the coupling bolt (arrow) between electronic
power steering column and intermediate shaft.
(Tightening Torque: 50 N·m)
Inspection
1. Check if electronic controller is normal. Replace the electronic controller if necessary.
2. Check steering column assembly for wear, cracks or deformation, and welding or correction is not allowed.
Replace the steering column assembly if necessary.
3. Check steering column bearing for looseness, wear or sticking. Replace the steering column assembly if
necessary.
Assembly
Assembly is in the reverse order of disassembly.
Installation
Installation is in the reverse order of removal.
RT21280280
CAUTION
Before installing steering column assembly, slide the spline at lower part of steering column assembly
onto intermediate shaft upper universal joint first.
Tighten the fixing nuts, bolts and screws in place.
Install each connector in place.
28–
24
1
29
HYDRAULIC ASSIST STEERING
Description 29-3
Operation 29-4
Specifications 29-5
Tool 29-5
Steering Fluid Reservoir Assembly
Removal 29-10
Inspection 29-10
Installation 29-11
Removal 29-12
Inspection 29-16
Installation 29-16
Removal 29-17
Disassembly 29-18
Inspection 29-18
Assembly 29-18
Installation 29-18
Removal 29-19
Inspection 29-19
Installation 29-20
Removal 29-21
Inspection 29-21
Installation 29-22
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст