Jaguar XJ (X350). Service manual — part 509
133 . NOTE:
Left-hand shown, right hand similar.
Connect the fuel injector electrical connectors.
134 . Attach the engine wiring harness.
135 . Install the engine cover retaining bracket.
136 . Install the engine cover retaining bracket.
137 . NOTE:
Left-hand shown, right-hand similar.
Install the ignition coil cover.
138 . Connect the knock sensor electrical connectors.
139 . NOTE:
Right-hand shown, left-hand similar.
Install the charge air coolers.
www.
•
Install a new charge air cooler gasket.
•
Tighten to 13 Nm.
140 . Install the supercharger.
•
Tighten to 24 Nm.
141 . Connect the manifold absolute pressure (MAP) sensor.
142 . Install the air intake elbow.
•
Install a new gasket.
•
Install new retaining bolt seals.
•
Tighten to 24 Nm.
143 . NOTE:
Make sure ground strap is correctly installed to the location noted.
Install the air intake elbow retaining bracket lower retaining bolts.
•
Tighten to 20 Nm.
144 . Connect the air intake elbow pipes.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст