Jaguar XJ (X350). Service manual — part 568
![](/vehicle/yohir/vahe/souieto/roore.png)
30 . Lower the vehicle.
31 . Remove the charge air cooler pipe.
32 . Detach the turbocharger inlet pipe.
Remove the retaining nut.
33 . NOTE:
Lock the water pump pulley with suitable 6 mm bar.
![](/vehicle/yohir/vahe/souieto/cknomero.png)
NOTE:
Discard the water pump pulley retaining bolts.
Remove the water pump pulley.
34 . Remove the lower timing cover.
Remove and discard the gasket.
Installation
1 . NOTE:
Install a new gasket.
Install the lower timing cover.
Tighten to 10 Nm.
www.
![](/vehicle/yohir/vahe/souieto/xxi.png)
2 . Install the water pump pulley.
Install new water pump pulley retaining bolts.
Tighten to 24 Nm.
3 . Attach the turbocharger inlet pipe.
4 . Attach the charge air cooler pipe.
![](/vehicle/yohir/vahe/souieto/quwoucelo.png)
5 . Raise the vehicle.
6 . Attach the charge air cooler hose.
1) Tighten to 4 Nm.
2) Tighten to 8 Nm.
7 . Install the crankshaft vibration damper.
For additional information, refer to Crankshaft Vibration Damper (12.21.09)
8 . NOTE:
Install a new gasket.
Install the right-hand timing cover.
Tighten to 10 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст