Jaguar XJ (X350). Service manual — part 839
14 . NOTE:
Left-hand shown, right-hand similar.
Remove and discard the rear subframe rear retaining bolts.
15
.
WARNING: Rotate the special tool height adjustment valve slowly. Failure to
follow this instruction may result in personal injury.
CAUTION: Make sure the rear subframe weight is evenly supported on the special
tool. Failure to follow this instruction may result in damage to the vehicle.
CAUTION: Make sure when lowering the rear subframe damage does not occur to
the surrounding components.
Using the special tool, lower the rear subframe to a maximum of 152mm (6 inch)
Vehicles with supercharger
16 . NOTE:
Rear subframe shown removed for clarity.
Disconnect the fuel pump driver module electrical connector.
17 . NOTE:
Rear subframe shown removed for clarity.
Remove the fuel pump driver module.
Remove the retaining clip.
www.
All vehicles
18 . NOTE:
Rear subframe shown removed for clarity.
Disconnect the evaporative emission canister vent solenoid vent hose.
19 . NOTE:
Rear subframe shown removed for clarity.
Disconnect the evaporative emission canister vent solenoid electrical connector.
20 . NOTE:
Rear subframe shown removed for clarity.
Disconnect the evaporative emission canister vapor pipes.
For additional information, refer to Quick Release Coupling
21 . NOTE:
Rear subframe shown removed for clarity.
Detach the evaporative emission canister.
22 . Remove the evaporative emission canister.
Installation
All vehicles
1 . Install the evaporative emission canister.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст