Jaguar XJ (X350). Service manual — part 424
![](/vehicle/yohir/vahe/souieto/qutallin.png)
5
.
CAUTION: The screw thread in the crankshaft must be cleaned out before a new
crankshaft pulley bolt is installed.
CAUTION: A new crankshaft pulley bolt must be used.
Install, but do not tighten, a new crankshaft pulley retaining bolt.
Install the crankshaft pulley and locking ring to the crankshaft.
6
.
CAUTION: Under no circumstances should the crankshaft setting peg 303-645 be
used in the following operations to lock the crankshaft.
Using special tools, retain the crankshaft pulley.
Tighten the crankshaft pulley retaining bolt to 375 Nm.
![](/vehicle/yohir/vahe/souieto/din.png)
7 . Remove the special tools.
8 . Attach the engine harness.
9 . Install the power steering pump mounting bracket.
Tighten to 25 Nm.
10 . Install the accessory drive belt idler pulley.
Tighten to 25 Nm.
www.
![](/vehicle/yohir/vahe/souieto/puntlldeavea.png)
Vehicles with supercharger
11 . Install the supercharger drive belt tensioner. <<303-05>>
All vehicles
12 . Install the water pump pulley.
Tighten to 10 Nm + 45°.
13 . Install the air conditioning compressor. <<412-03>>
14 . Install power steering pump. <<211-02>>
Vehicles with supercharger
15 . Install the supercharger drive belt. <<303-05>>
Vehicles without supercharger
16 . Install the oil cooler.
For additional information, refer to
All vehicles
17 . Install the left-hand valve cover.
For additional information, refer to
18 . Install the right-hand valve cover.
For additional information, refer to
19 . Install the cooling fan motor and shroud. <<303-03A>>
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст