Jaguar XJ (X350). Service manual — part 1600
Stage 2: Tighten 270°.
7 . Remove the special tool.
8 . Install a new front subframe front retaining bolt.
Stage 1: Tighten to 100 Nm.
Stage 2: Tighten 270°.
9 . Remove the special tool.
10 . NOTE:
Left-hand shown, right-hand similar.
Attach the engine mount.
Tighten to 63 Nm.
11 . NOTE:
Left-hand shown, right-hand similar.
Attach the rear lower arm.
www.
12 . NOTE:
Left-hand shown, right-hand similar.
Attach the front lower arm.
13 . NOTE:
Left-hand shown, right-hand similar.
Attach the air spring assembly.
Tighten to 175 Nm.
14 . NOTE:
Left-hand shown, right-hand similar.
Release the upper arm.
15 . Install the steering gear.
Tighten to 100 Nm.
16 . NOTE:
Left-hand shown, right-hand similar.
Connect the headlamp leveling sensor electrical connector.
17 . NOTE:
Left-hand shown, right-hand similar.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст