Jaguar XJ (X350). Service manual — part 332
![](/vehicle/yohir/vahe/souieto/cosserongoro.png)
6 . Remove the left-hand exhaust manifold heat shield.
7 . Raise the vehicle.
8
.
NOTE:
Engine shown removed for clarity.
NOTE:
When an exhaust manifold retaining stud is removed, it must be replaced with a new
retaining stud and nut.
Remove the left-hand exhaust manifold lower retaining nuts.
![](/vehicle/yohir/vahe/souieto/and.png)
9 . Lower the vehicle.
10
.
NOTE:
Engine shown removed for clarity.
NOTE:
When an exhaust manifold retaining stud is removed, it must be replaced with a new
retaining stud and nut.
Remove the left-hand exhaust manifold.
Remove and discard the left-hand exhaust manifold gasket.
Installation
1 . NOTE:
Engine shown removed for clarity.
NOTE:
When a new exhaust manifold retaining stud is installed, tighten to 9 Nm.
www.
![](/vehicle/yohir/vahe/souieto/oser.png)
Tighten the exhaust manifold retaining nuts in the sequence shown.
To install, reverse the removal procedure.
Install a new left-hand exhaust manifold gasket.
Tighten to 20 Nm.
2 . Tighten to 10 Nm.
3 . Tighten to 10 Nm.
NOTE:
![](/vehicle/yohir/vahe/souieto/thicrere.png)
Exhaust Manifold LH - VIN Range:
G45704->G99999 (30.15.55)
Removal
All vehicles
1 . Remove the engine cover.
2 . Remove the left-hand exhaust manifold heat shield.
Vehicles with secondary air injection (AIR)
3 . Disconnect the secondary air injection (AIR) control valve to exhaust manifold tube.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст