Jaguar XJ (X350). Service manual — part 1526
Rear Door Lock Actuator (76.37.09)
Removal
1 . Remove the rear door trim panel. <<501-05>>
2 . Disconnect the door speaker electrical connector.
3 . Detach the door wiring harness.
4 . Detach the door wiring harness grommet.
5 . Remove the door inner weathershield.
6 . Remove the exterior door handle connecting rod retaining clip.
7 . Detach the exterior door handle connecting rod from the front door lock actuator.
8 . Remove the rear door lock actuator retaining screws.
9 . Reposition the rear door lock actuator and actuator remote cable assembly.
10 . Remove the rear door lock actuator and actuator remote cable assembly.
Disconnect the electrical connectors.
www.
11 . Remove the actuator remote cable from the rear door lock actuator.
1) Detach the actuator remote outer cable.
2) Remove the actuator remote cable from the rear door lock actuator.
Installation
1 . To install, reverse the removal procedure.
Tighten to 7 Nm.
501-16 : Wipers and Washers
Specifications
Specifications
Torque Specifications
Description
Nm lb-ft lb-in
Mounting arm and pivot shaft retaing bolts 12 9
—
Wiper arm retaining nuts
17 13 —
Wiper motor retaining retaining screws
15 11 —
Wiper motor shaft retaining nut
17 13 —
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст