Jaguar XJ (X350). Service manual — part 233
![](/vehicle/yohir/vahe/meloningh/mykuteirerom.png)
Replace the brake booster/pedal box gasket.
To install, reverse the removal procedure.
Tighten to 25 Nm.
NOTE:
![](/vehicle/yohir/vahe/meloningh/farls.png)
Brake Vacuum Pump
Removal
1 . Remove the oil filler cap.
2 . Remove the engine cover.
3 . Install the engine oil filler cap to prevent foreign material entering the valve cover.
4 . Remove the injector sound proofing.
5
.
CAUTION: Make a note of the connection orientation of the high and low pressure
hoses to the sensor ports. Make sure the hoses are located to the correct sensor port when
www.
![](/vehicle/yohir/vahe/meloningh/kin.png)
installed. Failure to follow these instructions may result in damage to the vehicle.
Detach the diesel particulate filter differential pressure sensor high-pressure and low-pressure
hoses.
6 . Detach the diesel particulate filter high-pressure and low-pressure pipes.
Remove the retaining nut.
7 . Disconnect the pipes from the brake vacuum pump.
8 . Remove the right-hand catalytic converter.
For additional information, refer to
Catalytic Converter - 2.7L Diesel (17.50.05)
![](/vehicle/yohir/vahe/meloningh/usth.png)
9
.
Detach the diesel particulate filter high-pressure and low-pressure pipes from the
transmission housing.
Remove the retaining bolt.
Detach the retaining clip.
10
.
Detach the diesel particulate filter high-pressure and low-pressure pipes from the retaining
bracket.
Remove the retaining bolt.
11 . Detach the transmission harness connector from the mounting bracket.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст